The Delfield F17C78P Self-Contained Refrigerated Base Equipment Stands
Why Use Delfield's Equipment Stands?
EcoMark Fabrication consists of several standard models that can be
integrated with options and accessories to create specific customer
solutions. Everything from basic utility storage to several refrigerators,
freezers, prep tables, hot food tables and display cases.
Superior Refrigeration Systems
Space saving mullion style evaporator coils distribute the air evenly
throughout the base cabinets to maximize performance while improving
overall energy consumption
Adaptive defrost logic is built into the temperature controls for on
demand defrost only when the unit needs it and hot gas defrost systems
are utilized to further conserve energy
All temperature controls are located outside of the refrigeration
environments to improve efficiency and reliability
Efficient Base Design
Refrigerated bases are constructed to be efficient and durable
High-density polyurethane foam is injected as a two-part liquid to
ensure all gaps are filled and properly insulated as well as adding
overall strength to the units
ABS base fronts are utilized as a thermal break around door openings to
prevent condensation and ice build-up
ABS interior sides and door fronts improve the overall insulation of the
base and provide molded accommodations for shelves and door gaskets
Stainless steel interior backs and bottoms allow flexibility with
overall unit lengths
Expert Cold Pan Design
EcoMark cold pans and prep tables utilize expertly designed mechanically
cooled wrapped cold wall construction
Secure refrigeration lines ensure maximum contact and efficiency
Integral “V” stamped pan rests are formed directly into the cold pan
interior walls to eliminate any loose clips or thumbscrews while
improving cleanability
Full Extension Plus Drawer System
Delfield’s full extension plus drawer system literally surpasses every
drawer on the market today. In fact they extend a full 15% further than
other manufactures.
Delfield F17C78P Standart Features
High density environmentally friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Globala Warming Potential)
polyurethane foam throughout unit
Drawer system holds 12" x 20" x 4" deep hotel pans on refrigerated
models. 12" x20" x 8" deep hotel pans for freezer models.
F17C78P: 78" Refrigerated Equipment Stand
Top is 18-gauge stainless steel, with integral front marine edge
Cutting board brackets with 1.25" thick x 9.50" deep maple cutting board
Snap in dart style vinyl magnetic gasket
Drawer handles are recessed black plastic and held in with a positive
lock system
6.12" adjustable full stainless steel legs
8’ cord and plug supplied
Interior refrigerated base cabinet section to maintain 36º to 41º
Digital thermometer
Environmentally friendly R290 refrigerant
One year parts and 90 day labor standard warranty
Delfield F17C78P Options & Accessories
Stainless steel back
Stainless steel end
Laminate facing (drawers only)
Laminate back
Laminate end
Casters
Doors, except 32"
Single drawer in lieu of two high drawers (8" deep pans) for
refrigerated bases
Available in R404a refrigerant (contact factory)
Remote refrigeration (contact factory)
Locks
220V/50 cycle electrical*
8" deep clear polycarbonate pans in full, 1/2 and 1/3 size dimensions
available
Celsius readout for electronic control
* Inclusion of this option will alter the electrical specifications of the
unit
Delfield F17C78P Specification
Stainless steel top is constructed with integral front
marine edge nosing and rear backsplash. Stainless steel bars run front
to back on both sides for support and spline purposes. Stainless steel
interior sub-top is made integral with the top by injecting 2.00" of
high density environmentally friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global Warming Potential)
polyurethane foam between the tops. Cutting board brackets are attached
to each side and house a 1.25" thick x 9.5" deep maple cutting board.
Refrigerated base interior back and bottom are
constructed of stainless steel. Exterior back and bottom are made of
galvanized steel. Exterior sides made of stainless steel. Both left and
right interior sides are formed of ABS plastic. The base is injected
with 2.00" of high density polyurethane foam between the exterior and
interior. Refrigerated base fronts are made of .095" thick ABS
thermoformed plastic and backed up by ridged polyurethane water blown
injection molded frames.
Single units are supplied with wall-mounted bracket and
threaded rod to allow installation of the unit against a solid surface.
Drawer system is sized to hold 12" x 20" x 4" deep
hotel pans and smaller fractional pans on refrigerated models. Drawer
system is sized to hold 12" x 20" x 8" deep hotel pans and smaller
fractional pans on freezer models and available on refrigerated models.
Drawer system is all stainless steel construction. Tracks are designed
with a stay shut feature that holds the drawer gasket tight to the base
front on uneven floors. Exterior drawer fronts are made of stainless
steel; and an interior made of ABS plastic with formed in channels to
house the snap-in dart style santoprene gasket. Each drawer front is
injected with 1.87" of high density polyurethane foam between the
exterior and interior. Handles are recessed black plastic and held in
with a positive lock system.
Refrigeration system uses R290 refrigerant, and
maintains 36˚F (2˚C) to 40˚F (4˚C) interior cabinet temperature at 100˚F
(38˚C) ambient room temperature. Interior cabinet is cooled with mullion
style blower coils (coated) mounted between each door/drawer section for
even air and temperature control. An electronic temperature control and
pre-wired condensing unit with hot gas condensate evaporator are
installed in the machine compartment. The digital Thermometer with
stainless steel guard is located in the Top nosing above the machine
compartment (standard on right) .
Electrical Connections are 115V-60H-1PH. Units are
supplied with an 8’ cord and plug.
The image above may not exactly represent the product
