EcoMark Fabrication consists of several standard models that can be
integrated with options and accessories to create specific customer
solutions. Everything from basic utility storage to several refrigerators,
freezers, prep tables, hot food tables and display cases.
Superior Refrigeration Systems
Space saving mullion style evaporator coils distribute the air evenly
throughout the base cabinets to maximize performance while improving
overall energy consumption
Adaptive defrost logic is built into the temperature controls for on
demand defrost only when the unit needs it and hot gas defrost systems
are utilized to further conserve energy
All temperature controls are located outside of the refrigeration
environments to improve efficiency and reliability
Efficient Base Design
Refrigerated bases are constructed to be efficient and durable
High-density polyurethane foam is injected as a two-part liquid to
ensure all gaps are filled and properly insulated as well as adding
overall strength to the units
ABS base fronts are utilized as a thermal break around door openings to
prevent condensation and ice build-up
ABS interior sides and door fronts improve the overall insulation of the
base and provide molded accommodations for shelves and door gaskets
Stainless steel interior backs and bottoms allow flexibility with
overall unit lengths
Expert Cold Pan Design
EcoMark cold pans and prep tables utilize expertly designed mechanically
cooled wrapped cold wall construction
Secure refrigeration lines ensure maximum contact and efficiency
Integral “V” stamped pan rests are formed directly into the cold pan
interior walls to eliminate any loose clips or thumbscrews while
improving cleanability
Full Extension Plus Drawer System
Delfield’s full extension plus drawer system literally surpasses every
drawer on the market today. In fact they extend a full 15% further than
other manufactures.
Delfield F17OS48 Standart Features
One shelf constructed of stainless steel with double hemmed nosing are
spot welded between the sides and supported with two 14-gauge U-channels
with PL-400 sound deadening adhesive
F17OS48: Open shelf equipment stand 48” in length
Top is stainless steel, with integral front marine edge
Standard units have unfinished ends
Stainless steel cutting board brackets with 1.25” thick x 9.50” deep
maple cutting board
14-gauge leg rails that run the entire length of the unit
Stainless steel bottom shelf
6.12” adjustable full stainless steel legs and bullet feet
One year parts and 90 day labor standard warranty
Delfield F17OS48 Options & Accessories
Stainless steel back
Stainless steel end
Laminate back
Laminate end
Casters
Delfield F17OS48 Specification
Top is constructed of stainless steel, with integral
front marine edge nosing and rear backsplash. Spline bars are made of
stainless steel and run front to back on both the left and right
stainless steel sides for support and spline purposes. Two pieces of
C-channel are welded and glued with construction adhesive to the under
side of the top for strength and sound deadening. As a standard, cutting
board brackets are attached to each side and house a 1.25” thick x 9.5”
deep maple cutting board.
Base is constructed of stainless steel sides. One
bottom shelf constructed of stainless steel with double hemmed nosing is
spot welded between the sides and braced for extra support.
Unit is supported with two leg rails that run the entire length of the
unit. Leg rails are welded to the bottom side of the unit and are tied
together with two braces running front to back. Caster/leg boxes are
welded inside the leg rail and 6.12” adjustable legs are mounted as
standard with (4) 5/16” bolts.