The Delfield F18FC62P Self-Contained Freezer Base Work Tables
Why Use Delfield's Equipment Stands?
EcoMark Fabrication consists of several standard models that can be
integrated with options and accessories to create specific customer
solutions. Everything from basic utility storage to several refrigerators,
freezers, prep tables, hot food tables and display cases.
Superior Refrigeration Systems
Space saving mullion style evaporator coils distribute the air evenly
throughout the base cabinets to maximize performance while improving
overall energy consumption
Adaptive defrost logic is built into the temperature controls for on
demand defrost only when the unit needs it and hot gas defrost systems
are utilized to further conserve energy
All temperature controls are located outside of the refrigeration
environments to improve efficiency and reliability
Efficient Base Design
Refrigerated bases are constructed to be efficient and durable
High-density polyurethane foam is injected as a two-part liquid to
ensure all gaps are filled and properly insulated as well as adding
overall strength to the units
ABS base fronts are utilized as a thermal break around door openings to
prevent condensation and ice build-up
ABS interior sides and door fronts improve the overall insulation of the
base and provide molded accommodations for shelves and door gaskets
Stainless steel interior backs and bottoms allow flexibility with
overall unit lengths
Expert Cold Pan Design
EcoMark cold pans and prep tables utilize expertly designed mechanically
cooled wrapped cold wall construction
Secure refrigeration lines ensure maximum contact and efficiency
Integral “V” stamped pan rests are formed directly into the cold pan
interior walls to eliminate any loose clips or thumbscrews while
improving cleanability
Full Extension Plus Drawer System
Delfield’s full extension plus drawer system literally surpasses every
drawer on the market today. In fact they extend a full 15% further than
other manufactures.
Delfield F18FC62P Standart Features
High density foamed in place environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming
Potential) polyurethane insulation keeps energy costs low
Interior cabinet is cooled with mullion style evaporator blower coils
(coated) mounted between each door/drawer section for very even air and
temperature control
Interior freezer base cabinet will maintain 0° to -5° temperatures at
100° ambient room temperature meeting NSF requirements. Defrost is
controlled by the electronic thermostat
F18FC62P: 62” freezer work table
Standard heavy duty units have unfinished ends
Heavy duty stainless steel top construction
Stainless steel refrigerated base interior back and bottom
Base fronts are made of ABS plastic backed by rigid polyurethane
injection molded frames
One epoxy coated shelf for each door
Snap-in dart style vinyl magnetic gasket
Heavy duty leg rails that run the entire length of the unit
6.12” adjustable full stainless steel legs and bullet feet
8’ cord and plug supplied
36” standard work height
Environmentally friendly R290 refrigerant
Electronic control
One year parts and labor standard warranty.
Delfield F18FC62P Options & Accessories
Stainless steel end
Stainless steel back
Laminate facing (full front)
Laminate end
Laminate back
Cutting board
Tray rack
Drawers in lieu of one door
Locks
Fixed or adjustable height casters
220V/50 cycle electrical available in 404a custom sku# version
Available in R290 refrigerant (contact factory)
Remote refrigeration (contact factory)
Celsius readout for electronic control
* Inclusion of this option will alter the electrical specifications of the
unit
Delfield F18FC62P Specification
Exterior Top is constructed of one piece stainless
steel, with integral 2.12” (5cm) square nosing on front and 4.00” (10cm)
high by 2.00” (5cm) thick backsplash on rear. Top is insulated with
2.00” (5cm) high density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane.
Base interior has a stainless steel back and bottom.
Interior ends and door frames to be thermoformed ABS plastic. Base is
insulated with 1.50” (4cm) high density foamed in place polyurethane.
Exterior back and bottom of base is constructed of
galvanized steel. Exterior ends are constructed of galvanized steel.
Door(s) have a thermoformed plastic ABS plastic
interior liner and stainless steel exterior front. Door(s) have full
length handle(s) and a snap-in magnetic gasket which is easily
replaceable. Unit is furnished with (1) epoxy coated wire shelf for each
door section
Base has a machine compartment, standard on the right,
with condensing unit and electrical junction box installed. Machine
compartment has a removable louver for access to condensing unit. Blower
coil(s) are located behind the door mullions.
Refrigeration system uses R290 refrigerant and
maintains 0°F (-18°C) to -5°F (-21°C). Electronic temperature controls
and pre-wired condensing unit with hot gas condensate evaporator are
installed in the machine compartment. Electronic control for base reads
air temperature. On/Off switches for base are located behind the
louvered panel.
Electrical Connections are 115 volts, 60 hertz, single
phase. Unit has an 8’ (2.4m) long cord and plug.
Unit is mounted on 6.13” (16cm) high adjustable stainless steel legs.
The image above may not exactly represent the product
