The Delfield F18SC52DP Self-Contained Refrigerated Salad Top Tables
Why Use Delfield's Equipment Stands?
EcoMark Fabrication consists of several standard models that can be
integrated with options and accessories to create specific customer
solutions. Everything from basic utility storage to several refrigerators,
freezers, prep tables, hot food tables and display cases.
Superior Refrigeration Systems
Space saving mullion style evaporator coils distribute the air evenly
throughout the base cabinets to maximize performance while improving
overall energy consumption
Adaptive defrost logic is built into the temperature controls for on
demand defrost only when the unit needs it and hot gas defrost systems
are utilized to further conserve energy
All temperature controls are located outside of the refrigeration
environments to improve efficiency and reliability
Efficient Base Design
Refrigerated bases are constructed to be efficient and durable
High-density polyurethane foam is injected as a two-part liquid to
ensure all gaps are filled and properly insulated as well as adding
overall strength to the units
ABS base fronts are utilized as a thermal break around door openings to
prevent condensation and ice build-up
ABS interior sides and door fronts improve the overall insulation of the
base and provide molded accommodations for shelves and door gaskets
Stainless steel interior backs and bottoms allow flexibility with
overall unit lengths
Expert Cold Pan Design
EcoMark cold pans and prep tables utilize expertly designed mechanically
cooled wrapped cold wall construction
Secure refrigeration lines ensure maximum contact and efficiency
Integral “V” stamped pan rests are formed directly into the cold pan
interior walls to eliminate any loose clips or thumbscrews while
Full Extension Plus Drawer System
Delfield’s full extension plus drawer system literally surpasses every
drawer on the market today. In fact they extend a full 15% further than
Delfield F18SC52DP Standart Features
High density environmentally friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global Warming Potential)
polyurethane foam insulation throughout unit
Refrigerated base fronts are made of .095" thick ABS plastic backed by
rigid polyurethane water blown injection molded frames. (NO WOOD)
Interior base cabinet is cooled with mullion style evaporator blower
coils (coated) mounted between each door/drawer section for very even
air and temperature control
F18SC52DP: 52" length, twelve 1/6 pan capacity
16-gauge stainless steel top construction
Interior sub-top is made of ABS plastic
2BF stainless steel refrigerated base interior back and bottom
Exterior drawer fronts are stainless steel with ABS plastic liner
Snap-in dart style vinyl magnetic gasket
Recessed black plastic handles held in with a positive lock system
14-gauge leg rails that run the entire length
6.12" adjustable stainless steel legs and bullet feet
8' cord and plug on self
Environmentally friendly HFC-404A refrigerant
Cold pan to have 2BF stainless steel interior with pans recessed 2.00"
Cold pan is sized for two 1/6-size pans deep. Pans and adapter bars by
Cold pan has a on/off switch and maintains NSF7 temperatures utilizing a
Refrigerator interior maintains 36º to 40º at 100º ambient room
One year parts and 90 day labor standard warranty
Delfield F18SC52DP Options & Accessories
Available with LiquiTec cooling pan
Remote refrigeration (contact factory) Stainless steel end or back
Laminate facing (full front)
Laminate end or back
Polyethylene or composite cutting board
Drawers in lieu of one door, 19", 27" or 32"
Cold pan drain
Fixed or adjustable height casters
Celsius readout for electronic control
Fan assist package for rail
Temp control viewing lens on mechanical housing
* Inclusion of this option will alter the electrical specifications
Delfield F18SC52DP Specification
Exterior Top: Constructed of one-piece 16-gauge
stainless steel, with integral 2.12" (5.4cm) square nosing at the front,
and 4.00" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top
has an opening for use with 1/6 size pans. Pans and adapter bars
supplied by others. Pans are recessed 2” (5cm) and rest on pan supports.
Pan opening has a 20-gauge stainless steel removable cover. Temperature
in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed
2” (5cm), at 86°F ambient room temperature, meeting NSF7 requirements.
Unit has a stainless steel plate shelf 8.4” [21.3cm] above the doors.
Base interior has a 22-gauge stainless steel back and
bottom. Interior ends and door frames are thermoformed ABS plastic. Base
is insulated with 1.5" (3.8cm) of high-density foamed-in-place
Exterior back and bottom to be 24-gauge galvanized
steel. Exterior ends are 18-gauge galvanized steel.
Door(s) have a 22-gauge stainless steel exterior front,
with a thermoformed ABS plastic interior liner. Door(s) have a black
recessed handle and a snap-in magnetic gasket which is easily
Base has a machine compartment, standard on the right,
with condensing unit, condensate evaporator and an electrical junction
box installed. Machine compartment has a louver for access to condensing
unit. Blower coil(s) are located behind the door mullions and
refrigerate the cabinet. HFC-404A refrigerant and maintains 36°F (2°C)
to 40°F (4°C) interior cabinet temperature in the base.
Electronic control for base reads air temperature.
Electronic control for rail displays temperature for set point purposes
only. Display does not reflect air or product temps in unit. On/Off
switches for rail and base are located behind the louvered panel.
Electrical Connections: 115 volts, 60 Hertz, single
phase. Unit has an 8' (2.4m) long cord and plug.
Unit is mounted on 6.13" (15.6cm) high adjustable stainless steel legs.