The Delfield F18WC68P Self-Contained Refrigerated Work Tables
Why Use Delfield's Equipment Stands?
EcoMark Fabrication consists of several standard models that can be
integrated with options and accessories to create specific customer
solutions. Everything from basic utility storage to several refrigerators,
freezers, prep tables, hot food tables and display cases.
Superior Refrigeration Systems
Space saving mullion style evaporator coils distribute the air evenly
throughout the base cabinets to maximize performance while improving
overall energy consumption
Adaptive defrost logic is built into the temperature controls for on
demand defrost only when the unit needs it and hot gas defrost systems
are utilized to further conserve energy
All temperature controls are located outside of the refrigeration
environments to improve efficiency and reliability
Efficient Base Design
Refrigerated bases are constructed to be efficient and durable
High-density polyurethane foam is injected as a two-part liquid to
ensure all gaps are filled and properly insulated as well as adding
overall strength to the units
ABS base fronts are utilized as a thermal break around door openings to
prevent condensation and ice build-up
ABS interior sides and door fronts improve the overall insulation of the
base and provide molded accommodations for shelves and door gaskets
Stainless steel interior backs and bottoms allow flexibility with
overall unit lengths
Expert Cold Pan Design
EcoMark cold pans and prep tables utilize expertly designed mechanically
cooled wrapped cold wall construction
Secure refrigeration lines ensure maximum contact and efficiency
Integral “V” stamped pan rests are formed directly into the cold pan
interior walls to eliminate any loose clips or thumbscrews while
improving cleanability
Full Extension Plus Drawer System
Delfield’s full extension plus drawer system literally surpasses every
drawer on the market today. In fact they extend a full 15% further than
other manufactures.
Delfield F18WC68P Standart Features
High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane insulation keeps energy costs low
Interior cabinet is cooled with mullion style evaporator blower coils (coated) mounted between each door/drawer section for very even air and temperature control
Interior refrigerator will maintain 36° to 40° temperatures at 100° ambient room temperature meeting NSF requirements
F18WC68P: 68" Refrigerated Work Table
Standard heavy duty units have unfinished ends
Heavy duty stainless steel top construction
Stainless steel refrigerated base interior back and bottom
Base fronts are made of ABS plastic backed by rigid polyurethane injection molded frames
One epoxy coated shelf for each door
Snap-in dart style vinyl magnetic gasket
Recessed black plastic handles held in with a positive lock system
Heavy duty leg rails that run the entire length of the unit
Electronic control
6.12" adjustable full stainless steel legs and bullet feet
One year parts and 90 day labor standard warranty.
Delfield F18WC68P Options & Accessories
Stainless steel end
Stainless steel back
Laminate facing (full front)
Laminate end
Laminate back
Cutting board
Tray rack
Drawers in lieu of one door
Locks
Fixed and adjustable height casters
220V/50 cycle*
Available in R404a refrigerant (contact factory)
Remote refrigeration (contact factory)
Celsius readout for electronic control
Temp control viewing lens on mechanical housing
* Inclusion of this option will alter the electrical specifications of the unit
Delfield F18WC68P Specification
Exterior Top is constructed of one-piece stainless
steel, with integral 2.12" (5.4cm) high square nosing
at the front, and 4" (10.2cm) high by 2" (5.1cm) deep
backsplash at the rear. Top is insulated with 2" (5.1cm)
of high-density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global Warming
Potential) polyurethane.
Base interior has stainless steel back and bottom.
Interior ends and door frames are thermoformed ABS
plastic. Base is insulated with 1.5" (3.8cm) of highdensity foamed-in-place polyurethane. Electronic
temperature controls and pre-wired condensing unit
with hot gas condensate evaporator are installed in
the machine compartment. Electronic control for base
reads air temperature. On/Off switches for base are
located behind the louvered panel.
Exterior back and bottom are galvanized steel.
Exterior ends are galvanized steel.
Door(s) have a stainless steel exterior front, with a
thermoformed ABS plastic interior liner. Door(s) have
black recessed handle(s) and a snap-in magnetic gasket
which is easily replaceable. Each interior door section
has (1) removable epoxy-coated wire shelf.
Base has a machine compartment, standard on right,
with a condensing unit with condensate evaporator
and an electrical junction box installed. Machine
compartment has a removable louver for access to
condensing unit. Blower coil(s) are located behind the
door mullions. Refrigeration system uses HFC-404A
refrigerant, and will maintain 36°F (2°C) to 40°F (4°C)
interior cabinet temperature.
Refrigeration System: R290 refrigerant, and maintains
36°F (2°C) to 40°F (4°C) interior cabinet temperature.
Interior cabinet is cooled with mullion style blower
coils (coated) with expansion valves mounted between
each door/drawer section for even air and temperature
control.
Electronic temperature control controls and pre-wired
condensing unit are installed in the machine
compartment. Electronic control for base reads air
temperature. On/Off switches for base are located
behind the louvered panel.
Electrical Connections: are 115 volts, 60 Hertz, single
phase. Unit has a 8' (2.4m) long cord and plug.
Unit is mounted on 6.13" (15.6cm) high adjustable
stainless steel legs.