The Delfield F2694CP Low-Profile Freezer Equipment Stands
Why Use Delfield's Equipment Stands?
Equipment stands need to have solid cabinet construction to support the
cooking equipment, while also having superior refrigeration and drawer
systems to match. Delfield has all of the above and more!
1- Delfield builds Equipment Stands for performance in
today’s tough kitchen environments. Grills, griddles and charbroilers
create great food, but also adverse ambient conditions for the
refrigerated equipment stands that support them. Standard height of 26”
and depth of 31” , make it easy to add additional pieces on top and
still maintain an ergonomic work height.
2- Delfield equipment stands are built to last.
Stainless steel tops, fronts and sides are standard with full perimeter
top marine edge for added durability and operational safety.
3- Environmentally safe high-density polyurethane foam
with no Ozone Depletion Potential (ODP) or Global Warming Potential
(GWP) is used for exceptional insulation qualities and added cabinet
rigidity and strength.
4- Heavy duty bracing and casters are used to safely
support heavy cooking equipment above.
5- Energy efficient mullion coil assemblies have a dual
fan system for optimal airflow and cooling throughout the cabinet.
6- Base interior sides and fronts are constructed of
durable ABS material for protection against daily dings while adding the
benefit of extra insulation and a thermal break.
7- Right sized TXV refrigeration systems for incredible
performance, efficiency and reliability
8- Electronic controls are located in the mechanical
housing with a water resistant sliding cover for added reliability.
9- For added safety, each unit comes standard with a
wall mount bracket with ability for easily removing from the front for
future cleaning or maintenance.
10- Digital LED temperature display with stainless
steel guard for added protection.
Drawer Systems
Delfield full-extension drawers are the best in the industry. The integral
drawer cage assembly is fully welded and built with heavy-duty stainless
steel components. The easily removable drawer tracks have selflubricating
rollers requiring no grease and allowing for smooth operation with no
metal to metal contact. Add a 10-year extended part warranty on the drawer
tracks and you end up with the best drawers in the industry
Delfield F2694CP Standart Features
High density environmentally friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global Warming Potential)
polyurethane foam insulation throughout unit
Base interior cabinet is cooled with mullion style coated blower coil(s)
mounted between each door/drawer section for even air and temperature
control
Full Extension Plus Drawer system is a complete drawer system. Drawer
system is sized to hold 12" x 20" x 4" deep hotel pans (by others). The
drawer system is all stainless steel construction for maximum durability
Top is heavy duty stainless steel, with full perimeter marine edge
Standard stainless steel ends
Exterior drawer fronts are stainless steel
Snap-in drawer gaskets for easy removal
8' cord and plug supplied
Electronic control
Wall-mounted bracket to prevent tipping
Base cabinet will maintain 0º to -5º temperatures at 100º ambient room
temperature meeting NSF7 requirements
When ordering, specify make, model and depth of cooking equipment
sitting on the equipment stand
Height of surface for setting equipment is 25.50"
Self-contained freezers are standard with a defrost timer
Environmentally friendly R290 refrigerant
Three year parts and labor warranty and an additional two year
compressor parts warranty
Delfield F2694CP Options & Accessories
Drawer locks
Stainless steel back
Mechanical housing left side
Casters
8" deep clear polycarbonate pans in full, 1/2 and 1/3 size dimensions
available
Celsius readout for electronic control
Plastic laminate end
Plastic laminate back
Plastic laminate front
Remote refrigeration available in R404A (contact factory)
Delfield F2694CP Specification
Exterior Top
Exterior top is 18-gauge stainless steel with full perimeter marine edge.
Corners are fully welded with smooth radii corners for easy clean out.
Interior subtop is 22-gauge stainless steel. Over two inches of
environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global Warming Potential) Polyurethane
two-part foam provides insulation and rigidity
Refrigerated Base
Refrigerated base has 22 gauge stainless steel interior back, bottom and
sides. Base exterior back, bottom and sides are constructed of galvanized
steel.
Full Extension
Full Extension Plus drawer system is a complete drawer system, which can
operate independent of the unit it’s installed in. Drawer system is sized
to hold 12" x 20" x 8“ deep hotel pans and smaller fractional pans. Drawer
system is all stainless steel construction for maximum durability. Drawer
track rollers are made of Delrin and do not require grease for operation.
Intermediate tracks are removable without tools and house Delfield’s
“anti-friction binary roller system". Drawer boxes are designed with “easy
pan grip flanges". Tracks are designed with a stay shut feature that holds
the drawer gasket tight to the base front on uneven floors. Exterior
drawer fronts are made of stainless steel; and an interior made of ABS
plastic with formed in channels to house the snap-in dart style santoprene
gasket. A galvanized brace is foamed in place to be an integral part of
the drawer front assembly. Each drawer front is injected with 1.87" of
high density polyurethane foam between the exterior and interior. Handles
are recessed black plastic and held in with a positive lock system.
Refrigeration System
Refrigeration system uses R290 refrigerant, and maintains 0˚F (-18˚C) to
-5˚F (-21˚C) interior cabinet temperature at 100˚F (38˚C) ambient room
temperature. Interior cabinet is cooled with mullion style blower coils
(coated) mounted between each door/drawer section for even air and
temperature control.
Finished
Finished stainless steel ends are standard. Louver, coil panel and drawer
faces are all standard with stainless steel construction. (Unit is
supplied with a wall-mounted bracket and threaded rod to allow
installation of the unit against a solid surface.)