Resources
Brand | Delfield |
---|---|
Model Number | F2962CP |
Weight | 479 lbs |
Width | 62.25" |
Depth | 31" |
Height | 24" |
Refrigeration | self-contained, side mounted |
Base Type | refrigerated |
Size | 2 section |
Exterior Finish | galvanized & stainless steel exterior |
Compressor HP | 1/5 HP |
Drawer Qty | 4 drawers |
Top Style | marine edge |
Special Features | low profil |
Top Finish | stainless steel top |
Equipment stands need to have solid cabinet construction to support the cooking equipment, while also having superior refrigeration and drawer systems to match. Delfield has all of the above and more!
Delfield full-extension drawers are the best in the industry. The integral drawer cage assembly is fully welded and built with heavy-duty stainless steel components. The easily removable drawer tracks have selflubricating rollers requiring no grease and allowing for smooth operation with no metal to metal contact. Add a 10-year extended part warranty on the drawer tracks and you end up with the best drawers in the industry
Exterior top is 18-gauge stainless steel with full perimeter marine edge. Corners are fully welded with smooth radii corners for easy clean out. Interior sub-top made of 22-gauge 2BF stainless steel is made integral with the top by injecting 2.00” of high density polyurethane foam between the exterior and interior tops.
Refrigerated base interior back and bottom are constructed of a 22-gauge
2BF stainless steel. Exterior bottom and back are made of 22-gauge
galvanized steel. Exterior sides aer made of stainless steel. Both left
and right interior sides are formed of ABS plastic. The base is injected
with 2.00” of high density polyurethane foam between the exterior and
interior. Refrigerated base fronts are made of .095” thick ABS
thermoformed plastic and backed up by ridged polyurethane water blown
injection molded frames. The frames are an excellent thermo-break and
superior structural material for fastening doors and drawers.
Finished
stainless steel ends are standard. Louver, coil panel and drawer faces are
all standard with stainless steel construction. Units are supplied with
wallmounted bracket and threaded rod to allow installation of the unit
against a solid surface.
Plus drawer system is a complete drawer system, which can operate independent of the unit it’s installed in. Drawer system is sized to hold 12” x 20” x 4” deep hotel pans and smaller fractional pans. Drawer system is all stainless steel construction for maximum durability. Drawer track rollers are made of Delrin and do not require grease for operation. Intermediate tracks are removable without tools and house Delfield’s “anti-friction binary roller system”. Drawer boxes are designed with “easy pan grip flanges”. Tracks are designed with a stay shut feature that holds the drawer gasket tight to the base front on uneven floors. Exterior drawer fronts are made of stainless steel; and an interior made of ABS plastic with formed in channels to house the snap-in
dart style santoprene gasket. A galvanized brace is foamed in place to be an integral part of the drawer front assembly. Each drawer front is injected with 1.87” of high density polyurethane foam between the exterior and interior. Handles are recessed black plastic and held in with a positive lock system. Drawers are backed by a 10-year warranty on the track assembly.
Unit is supported with two 14-gauge leg rails that run the entire length of the unit. Leg rails are welded to the bottom side of the unit and are tied together with two 12-gauge braces running front to back. Caster/leg boxes are welded inside the leg rail and 4” casters are mounted standard.
Refrigeration system uses R290 refrigerant, and maintains 36˚F (2˚C) to 40˚F (4˚C) interior cabinet temperature at 100˚F (38˚C) ambient room temperature. Interior cabinet is cooled with mullion style blower coils (coated) mounted between each door/drawer section for even air and temperature control. An electronic temperature control and pre-wired condensing unit with hot gas condensate evaporator are installed in the machine compartment. The digital Thermometer with stainless steel guard is located in the Top nosing above the machine compartment (standard on right).
Unit supplied with an 8.0’ (2.4m) cord and plug. A thermostat and pre-wired condensing unit with hot gas condensate evaporator are installed in the machine compartment. Models F2952C through F29110C protect the thermostat in a splash resistant enclosure. The digital thermometer with stainless steel guard is located in the top nosing above the machine compartment (standard on right). Interior refrigerated base cabinet will maintain 36°F to 40°F at 100°F ambient room temperature