Refrigerated Low-Profile Equipment Stand, 78-1/4"W x 31-47/50"D x 24"H, two-section, (4) drawers (pans not included), stainless steel top & drawer fronts, front non-spill edge, ABS interior sides, 4" casters, side-mounted refrigeration system with electric condensate evaporator, R290 Hydrocarbon refrigerant, 1/4 hp, cUL, UL
The Delfield F2978CP Self-Contained Low-Profile Refrigerated Equipment
Why Use Delfield's Equipment Stands?
Equipment stands need to have solid cabinet construction to support the
cooking equipment, while also having superior refrigeration and drawer
systems to match. Delfield has all of the above and more!
1- Delfield builds Equipment Stands for performance in
today’s tough kitchen environments. Grills, griddles and charbroilers
create great food, but also adverse ambient conditions for the
refrigerated equipment stands that support them. Standard height of 26”
and depth of 31” , make it easy to add additional pieces on top and
still maintain an ergonomic work height.
2- Delfield equipment stands are built to last.
Stainless steel tops, fronts and sides are standard with full perimeter
top marine edge for added durability and operational safety.
3- Environmentally safe high-density polyurethane foam
with no Ozone Depletion Potential (ODP) or Global Warming Potential
(GWP) is used for exceptional insulation qualities and added cabinet
rigidity and strength.
4- Heavy duty bracing and casters are used to safely
support heavy cooking equipment above.
5- Energy efficient mullion coil assemblies have a dual
fan system for optimal airflow and cooling throughout the cabinet.
6- Base interior sides and fronts are constructed of
durable ABS material for protection against daily dings while adding the
benefit of extra insulation and a thermal break.
7- Right sized TXV refrigeration systems for incredible
performance, efficiency and reliability
8- Electronic controls are located in the mechanical
housing with a water resistant sliding cover for added reliability.
9- For added safety, each unit comes standard with a
wall mount bracket with ability for easily removing from the front for
future cleaning or maintenance.
10- Digital LED temperature display with stainless
steel guard for added protection.
Delfield full-extension drawers are the best in the industry. The integral
drawer cage assembly is fully welded and built with heavy-duty stainless
steel components. The easily removable drawer tracks have selflubricating
rollers requiring no grease and allowing for smooth operation with no
metal to metal contact. Add a 10-year extended part warranty on the drawer
tracks and you end up with the best drawers in the industry
Delfield F2978CP Standart Features
High density environmentally friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global Warming Potential)
polyurethane foam insulation throughout unit
Base interior cabinet is cooled with mullion style coated blower coil(s)
mounted between each door/drawer section for even air and temperature
Full Extension Plus Drawer system is a complete drawer system. Drawer
system is sized to hold 12" x 20" x 4" deep hotel pans (by others). The
drawer system is all stainless steel construction for maximum durability
Top is heavy duty stainless steel, with full perimeter marine edge
Standard stainless steel ends
Exterior drawer fronts are stainless steel
Snap-in drawer gaskets for easy removal
Mounted on casters
8' cord and plug supplied
Interior refrigerated base cabinet section to maintain 36° to 40°
Wall-mounted bracket to prevent tipping
When ordering, specify make, model and depth of cooking equipment
sitting on the equipment stand
Height of surface for setting equipment is 25.50"
Environmentally friendly R290 refrigerant
Three year parts and labor warranty and an additional two year
compressor parts warranty
78" Low-Profile Equipment Stand
Delfield F2978CP Options & Accessories
Stainless steel back
Mechanical housing left side
6" casters in lieu of 4"
6.12" adjustable full stainless steel legs and bullet feet
Doors in lieu of drawers (except 32")
Single drawer in lieu of two high drawers (8" deep pans)
Plastic laminate end
Plastic laminate back
Plastic laminate front
8" deep clear polycarbonate pans in full, 1/2 and 1/3 size dimensions
Celsius readout for electronic control
Remote refrigeration available in R404A (contact factory)
Electrical connections are 115V-60H-1PH and supplied with an 8’ cord and plug.
Delfield F2978CP Specification
Exterior top is 18-gauge stainless steel with full perimeter marine edge.
Corners are fully welded with smooth radii corners for easy clean out.
Interior sub-top made of 22-gauge 2BF stainless steel is made integral
with the top by injecting 2.00” of high density polyurethane foam between
the exterior and interior tops.
Refrigerated Base Interior
Refrigerated base interior back and bottom are constructed of a 22-gauge
2BF stainless steel. Exterior bottom and back are made of 22-gauge
galvanized steel. Exterior sides aer made of stainless steel. Both left
and right interior sides are formed of ABS plastic. The base is injected
with 2.00” of high density polyurethane foam between the exterior and
interior. Refrigerated base fronts are made of .095” thick ABS
thermoformed plastic and backed up by ridged polyurethane water blown
injection molded frames. The frames are an excellent thermo-break and
superior structural material for fastening doors and drawers.
stainless steel ends are standard. Louver, coil panel and drawer faces are
all standard with stainless steel construction. Units are supplied with
wallmounted bracket and threaded rod to allow installation of the unit
against a solid surface.
Plus drawer system is a complete drawer system, which can operate independent of the unit it’s installed in. Drawer system is sized to hold 12” x 20” x 4” deep hotel pans and smaller fractional pans. Drawer system is all stainless steel construction for maximum durability. Drawer track rollers are made of Delrin and do not require grease for operation. Intermediate tracks are removable without tools and house Delfield’s “anti-friction binary roller system”. Drawer boxes are designed with “easy pan grip flanges”. Tracks are designed with a stay shut feature that holds the drawer gasket tight to the base front on uneven floors. Exterior drawer fronts are made of stainless steel; and an interior made of ABS plastic with formed in channels to house the snap-in
dart style santoprene gasket. A galvanized brace is foamed in place to be an integral part of the drawer front assembly. Each drawer front is injected with 1.87” of high density polyurethane foam between the exterior and interior. Handles are recessed black plastic and held in with a positive lock system. Drawers are backed by a 10-year warranty on the track assembly.
Unit is supported with two 14-gauge leg rails that run the entire length of the unit. Leg rails are welded to the bottom side of the unit and are tied together with two 12-gauge braces running front to back. Caster/leg boxes are welded inside the leg rail and 4” casters are mounted standard.
Refrigeration system uses R290 refrigerant, and maintains 36˚F (2˚C) to 40˚F (4˚C) interior cabinet temperature at 100˚F (38˚C) ambient room temperature. Interior cabinet is cooled with mullion style blower coils (coated) mounted between each door/drawer section for even air and temperature control. An electronic temperature control and pre-wired condensing unit with hot gas condensate evaporator are installed in the machine compartment. The digital Thermometer with stainless steel guard is located in the Top nosing above the machine compartment (standard on right).
Unit supplied with an 8.0’ (2.4m) cord and plug. A thermostat and pre-wired condensing unit with hot gas condensate evaporator are installed in the machine compartment. Models F2952C through F29110C protect the thermostat in a splash resistant enclosure. The digital thermometer with stainless steel guard is located in the top nosing above the machine compartment (standard on right). Interior refrigerated base cabinet will maintain 36°F to 40°F at 100°F ambient room temperature