The Delfield KHCR-74-BP Shelleyglas Mobile Self-Contained Hot/Cold
Combination Counters
Why Use Delfield's Shelleyglas?
When it comes to great-looking, hard-working equipment, Shelleyglas is at
the head of the line! With 25 standard colors, and plenty of designer
graphics, you can create the look you want. And because they are
fiberglass, our bases are made to last. That’s dependable foodservice
equipment loaded with eye-appeal.
Durable
Shelleyglas bases are durable, constructed with steel-reinforced molded
fiberglass corners. Shelleyglas resists dents better than metal – even
when kids kick the bases – boat and auto testing confirm it. For added
strength, steel-reinforced caster mounting plates and raised reinforced
bottom are laminated into the base.
Customizable
Shelleyglas by Delfield delivers the customized look to meet your needs.
Choose the length and select counter heights from 28 to 36 inches. Then
add inserts accessories and finishing touches to create an eye-catching
line up that gives you years of exceptional service
Superior Construction
Steel reinforced, molded fiberglass
14-gauge stainless steel tops
Riveted top rail with reinforced openings for extra strength
Permanent, molded-in color
5” polyurethane locking casters are standard
Full fire code rating; UL and NSF ratings
Easy-to-use, stainless steel, fully retractable interlock system on
bases and tray slides
Delfield KHCR-74-BP Standard Features
KHCR-74-BP: 1 hot well, 39” x 21.62” cold pan
One piece, molded fiberglass pylon (base), Accessories fully rounded
corners, permanent color
All corners and center sides reinforced with galvanized bracing,
laminated into the fiberglass
14-gauge tops
Standard on 5” polyurethane swivel casters
Easy to use stainless steel interlock system is standard on base and
tray slides
A maximum 10’ long cord and plug
Enclosed bases
One to four electrically heated, recessed diestamped stainless steel hot
food warmers
Each warmer accommodates a 12” x 20” x 6” pan (pans supplied by others)
All body cutouts reinforced with 14-gauge channel supports
Single hot food wells standard with 1/2” stainless steel drain(s)
manifolded together to one main gate valve
Cold pan is 7” deep constructed of stainless steel, equipped with a 1”
drain with valve
Environmentally friendly HFC-404A refrigerant
One year parts and 90 day labor standard warranty
Delfield KHCR-74-BP Options & Accessories
Tray slides and work shelves
Composite fold-down cutting board
Line-up interlock device
Glass front counter protector
Food shields
Stainless steel overshelf
Incandescent light fixtures*
LED light fixtures*
Radiant or bullet style heat lamps*
Open understorage with shelf
120V/60Hz/1ø, 15 amp convenience outlet with 10 amp breaker*
Stainless steel trim strips
Molded fiberglass trim strips
Adjustable stainless steel legs
Adjustable height casters
Adapter bars (specify length)
Energy saving power well (ESP)*
* Inclusion of these options will alter the electrical specifications of
the unit
Delfield KHCR-74-BP Specification
Exterior body is seamless, one piece molded fiberglass,
having smooth exterior surfaces and all corners fully rounded. The
fiberglass reinforced polyester (F.R.P.) is molded with permanent color.
Stress points are internally reinforced. supports
Exterior top is constructed of 14-gauge stainless
steel, welded, ground and polished into one integral unit. Top has one
to four electrically heated, recessed, die-stamped stainless steel hot
food warmers. Each warmer accommodates a 12.75” x 20.75” x 6” (32cm x
53cm x 15cm) deep pan. Single hot food wells standard with 1/2”
stainless steel drain(s) manifolded together to one main gate valve
Heated food warmers are constructed of die-stamped
stainless steel. Each heated food warmer is individually equipped with a
heating element rated at 1000 watts for 120 volt or 208/230 volt, 60
Hertz, single phase service and wired to an adjustable control switch
and indicator light in the control panel. Heated food warmers are
interwired to a maximum 10’ (3m) long cord with grounded plug for 115
volt or 208/230 volt, 60 Hertz, single phase electrical service
The refrigerated cold pan is 7” (18cm) deep and
constructed of stainless steel. The cold pan is separated from the
exterior top by a thermal break. Copper refrigeration tubing is attached
to the sides and bottom of the cold pan and is fully insulated with
foamed in place environmentally friendly, Kyoto Protocol Compliant, Non
ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential)
polyurethane insulation. Cold pan is equipped with a 1” (2.5cm) I.P.S.
drain with a drain valve located at the bottom of the unit. Temperatures
of 33°F (1°C) to 41°F (5°C) are maintained with pans recessed 2” (5cm)
at 86°F ambient room temperature. Pans rest on a stainless steel
bracket. (Pans by others)
Refrigeration system uses HFC-404A refrigerant and has
a selfcontained 115 volt, 60 Hertz, single phase hermetically sealed
condensing unit with adjustable cold pan temperature control. Unit is
wired with a 3-wire, grounded, maximum 10’ (3m) cord and plug. Unit has
an on/off switch for the cold pan mounted on the exterior.
Casters: Unit is mounted on 5” (13cm) diameter swivel
casters with non-marking polyurethane tires and plate brakes. Overall
height of caster assembly is 6.00” (15cm).
Optional Energy Saving Power wells (ESP) are
individually equipped with a heated pad on bottom and sides of well
rated at 500 watts for 208-230V or 240V. ESP wells provided with
individual solid state digital temperature control wired to one main
control panel with 4’ of conduit and wire. This option reduces energy
usage. ESP wells standard without drains. Optional drains available