The Delfield N8118-BP Drop-In Self-Contained Mechanically Cooled Cold Pans
Why Use Delfield's Drop-In?
Safety and Sanitation
UL and NSF - All Delfield Drop-in products are UL approved and NSF
certified. Which means you can count on safe, consistent construction and
performance every time.
Delfield Drop-in products are easy to install into any new or existing
counter. A press fit flange gasket comes pre-installed making the units
ready to drop-in immediately.
Delfield Drop-in products have an unmatched level of quality. The units
are reliably built by the best in the industry and come standard with a
90-day labor and 1-year parts warranty
Delfield Drop-in products are constructed with stainless steel tops and
interiors. Cold units are insulated with high-density polyurethane foam
and hot units are insulated with fiberglass.
Refrigeration lines are secured to the liner with stainless steel spot
clips and thermal transfer compound is applied to improve heat transferred
cool the food product better.
Delfield N8118-BP Standart Features
High density Environmentally friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global Warming Potential)
polyurethane foam insulation throughout unit
2 BF stainless steel interior liner wrapped and spot clipped with
refrigeration lines; thermal transfer compound is applied for superior
N8118-BP: 18” mechanically cooled cold pan
Integral V-stamped pan rest
20-gauge stainless steel top construction
Adapter bars are provided standard for 12” x 20” openings
Standard 1” plastic drain
Galvanized exterior body
Non-marring press fit top gasket
Condensing unit is suspended below on a 16-gauge galvanized frame
8’ cord and plug
Stainless steel louver provided for field installation
1 year parts and labor standard warranty
Delfield N8118-BP Specification
Top: is one-piece 20-gauge stainless steel. Interior
liner is 22-gauge stainless steel and is creased to a 1.00” (2.5cm)
diameter drain. Integral V-stamped pan rest recessed 2" (5cm) to
accommodate 12” x 20” (30cm x 51cm) pans 4” (10cm) or 6” (15cm) deep
supplied by others. Product temperatures of 33°F (1°C) to 41°F (5°C) are
maintained at 86°F (29˚C) ambient room temperature, meeting NSF 7
requirements. Adapter bars for 12” x 20” (30cm x 51cm) pans are
Sides are wrapped with refrigeration lines. Sides and
bottom are fully insulated with high-density environmentally friendly,
Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP
(Global Warming Potential) closed-cell polyurethane. Exterior housing is
24-gauge galvanized steel.
Condensing unit is suspended below the cold pan on a
16-gauge steel frame and uses R290 refrigerant. Electronic temperature
control. Unit has an 8’ (2.4m) cord and NEMA 5-15P plug. A stainless
steel louver is provided for field installation; cutout dimension is 12”
x 23.5” (30cm x 60cm).