The Delfield N8157-FAP Drop-In Self-Contained Forced Air Refrigerated Cold
Pans
Why Use Delfield's Drop-In?
Safety and Sanitation
UL and NSF - All Delfield Drop-in products are UL approved and NSF
certified. Which means you can count on safe, consistent construction and
performance every time.
Convenience
Delfield Drop-in products are easy to install into any new or existing
counter. A press fit flange gasket comes pre-installed making the units
ready to drop-in immediately.
Quality
Delfield Drop-in products have an unmatched level of quality. The units
are reliably built by the best in the industry and come standard with a
90-day labor and 1-year parts warranty
Construction
Delfield Drop-in products are constructed with stainless steel tops and
interiors. Cold units are insulated with high-density polyurethane foam
and hot units are insulated with fiberglass.
Refrigeration lines are secured to the liner with stainless steel spot
clips and thermal transfer compound is applied to improve heat transferred
cool the food product better.
Delfield N8157-FAP Standart Features
High density foamed in place environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs low
Black air deflectors to guide airscreen over flush mount pans
On/Off power switch, defrost timer and low pressure controls
N8157-FAP: 57” forced-air refrigerated cold pans
Environmentally friendly HFCR404A refrigerant
Push-in flange gasket standard
Delfield N8157-FAP Specification
Top: is one-piece 20-gauge stainless steel. Interior
liner is 22-gauge stainless steel and is creased to 1” I.P.S. (2.5cm)
diameter drain. 4 pan (57” [145cm]) models and larger have two drains. A
stainless steel bracket, flush with the top, to accommodate 12” x 20”
(30cm x 51cm) pans 4” (10cm) or 6" (15cm) deep supplied by others.
Product temperatures of 33°F (1°C) to 41°F (5°C) are maintained at 86°F
(30°C) ambient room temperature, meeting NSF 7 requirements. Adapter
bars are standard.
Sides and bottom: : are insulated with high-density
closed-cell environmentally friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global Warming Potential)
polyurethane. Exterior housing is 24-gauge galvanized steel.
Refrigeration: system uses HFC-404A refrigerant.
Condensing unit is suspended below the cold pan on a 16-gauge steel
frame. Temperature controlled by a low pressure control with separate
On/Off power switch and defrost timer. Unit is supplied with expansion
valve. Evaporator coil cools pans by air flowing over and under pans.A
stainless steel louver is provided for field installation; cutout
dimension is 11” x 22” (28cm x 56cm). A second opening at the rear of
the cabinet should be provided at installation to allow for proper air
circulation. Air Curtain assembly is removable without the use of tools.
Electrical system is 115/60c/1ph with NEMA 5-15 plug on
the N8131-FA, N8144-FA and N8157-FA models. The N8169-FA and N8182-FA
models come with a NEMA 5-20 plug.