Delfield N8273P Drop In Frost Top / Cold Slab

Delfield N8273P 73" Drop In Frost Top w/ Built In Compressor, Stainless Steel

DEL-N8273P
Details

Delfield N8273P 73" Drop In Frost Top w/ Built In Compressor, Stainless Steel

SKU DEL-N8273P

$5,966.00

Net 30 or as low as 145.65/mo with Credit Key Apply Now

Resources

Product PDF

Delfield N8273P Specs

Brand Delfield
Model Number N8273P
Weight 209 lbs
Width 73.38"
Depth 26"
Height 15.75"
Compressor HP 1/4 HP
Usable Top/Shelf Size 72.38"W x 25"D
Top Material stainless steel
Compressor Location bottom mounted
Installation Type drop-in
Voltage 115, 208/240, 230

The Delfield N8273P Drop-In Self-Contained Frost Top

Why Use Delfield's Drop-In?

Safety and Sanitation

UL and NSF - All Delfield Drop-in products are UL approved and NSF certified. Which means you can count on safe, consistent construction and performance every time.

The Delfield N8273P Drop-In Self-Contained Frost Top, Chef's Deal
The Delfield N8273P Drop-In Self-Contained Frost Top, Chef's Deal

Convenience

Delfield Drop-in products are easy to install into any new or existing counter. A press fit flange gasket comes pre-installed making the units ready to drop-in immediately.

Quality

Delfield Drop-in products have an unmatched level of quality. The units are reliably built by the best in the industry and come standard with a 90-day labor and 1-year parts warranty

The Delfield N8273P Drop-In Self-Contained Frost Top, Chef's Deal
The Delfield N8273P Drop-In Self-Contained Frost Top, Chef's Deal

Construction

Delfield Drop-in products are constructed with stainless steel tops and interiors. Cold units are insulated with high-density polyurethane foam and hot units are insulated with fiberglass.
Refrigeration lines are secured to the liner with stainless steel spot clips and thermal transfer compound is applied to improve heat transferred cool the food product better.

Delfield N8273P Standart Features

  • N8273P: 73” length self-contained frost top
  • Polyurethane foam insulation
  • On/off switch
  • Raised stainless steel top with full perimeter drain trough and 1/2” drain
  • Environmentally friendly HFC-404A refrigerant
  • Stainless steel louver provided
  • Push-in perimeter gasket

Delfield N8273P Specification

Top is one-piece, heavy-gauge stainless steel. Top has a drain trough and 2.00” (5cm) overhang around perimeter. Top is elevated 1.68” (4cm) above counter surface. Refrigeration lines are secured to the underside of the top and insulated with high-density, environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) closed-cell polyurethane. Exterior housing is heavy-gauge galvanized steel.

Condensing unit is suspended below the frost top on a heavygauge steel frame. Condensing unit uses HFC-404a refrigerant. Unit has an ON/OFF toggle switch, an 8’ (2.4m) cord and NEMA 5-15 plug. Unit has (1) stainless steel louver provided for field installation; cutout dimensions are 12.00” x 23.50” (30cm x 60cm). A second opening at the rear of the cabinet must be provided at installation to allow for proper air circulation.

Write Your Own Review
You're reviewing:Delfield N8273P 73" Drop In Frost Top w/ Built In Compressor, Stainless Steel
Your Rating