Resources
Brand | Delfield |
---|---|
Model Number | N8768N |
Weight | 130 lbs |
Width | 67.48" |
Depth | 15.87" |
Height | 9.5" |
Wet or Dry operation | wet or dry |
Pan capacity | (3) full size (12" x 20") |
Insulated or Non-Insulated | insulated |
Drain | without drain |
Construction | stainless steel top, corrosion resistant steel exterior |
Controls | infinite controls |
Style | individual pans |
UL and NSF - All Delfield Drop-in products are UL approved and NSF certified. Which means you can count on safe, consistent construction and performance every time.
Delfield Drop-in products are easy to install into any new or existing counter. A press fit flange gasket comes pre-installed making the units ready to drop-in immediately.
Delfield Drop-in products have an unmatched level of quality. The units are reliably built by the best in the industry and come standard with a 90-day labor and 1-year parts warranty
Delfield Drop-in products are constructed with stainless steel tops and
interiors. Cold units are insulated with high-density polyurethane foam
and hot units are insulated with fiberglass.
Refrigeration lines are secured to the liner with stainless steel spot
clips and thermal transfer compound is applied to improve heat transferred
cool the food product better.
Top shall be one-piece 18-gauge stainless steel, with 0.63” overhang
around perimeter and die stamped 19.87” x 11.87” (50.5cm x 30cm) openings
with depressed edges. Formed well below each opening shall be 6.25” (16cm)
deep. Each well shall have an individual infinite control and 1000 watt
heating element attached to bottom of well. Exterior housing shall be
20-gauge galvanized steel. Unit shall be insulated on sides and between
wells with 1.00” (2.5cm) fiberglass; bottom shall have 1.00” (2.5cm)
blanket insulation.
Unit shall have all individual controls wired to a control panel for
mounting in counter or at a remote location; 4’ (1.2 m) length of wiring
and conduit are provided. Unit shall have a three-wire electrical junction
box to allow hard-wiring at installation.Models with drains are manifolded
together standard to one main gate valve.