The Delfield SCSC-60-EFP Shelleysteel Mobile Self-Contained LiquiTec Cold
Pan Serving Counters
Why Use Delfield's Shelleysteel?
Shelleysteel’s rugged, welded stainless steel body stands up to everyday
abuse. This versatile equipment offers an almost unlimited selection of
laminate colors and designs to customize for your needs. Best of all, it’s
a cost-effective system that’s easy to modify over years of use.
Built to Last
Shelleysteel bases have a heavy, 18-gauge stainless steel exterior,
reinforced with overlapping 16-gauge corners that are welded in place. The
galvanized steel bottom adds extra rigidity and strength. Coved corners
protect the laminate from wear and tear and make cleanup easier.
Built to Suit You
Let Delfield create your ideal lineup. Select Shelleysteel bases in a
variety of custom lengths, with counter heights from 28 to 36 inches. Add
canopies, decal packages and other trim.
High Quality Construction
Bases are mobile and modular for greater versatility
18-gauge welded stainless steel body with structural integrity
5” polyurethane locking casters are standard
UL and NSF listed
Easy-to-use, stainless steel, fully retractable interlock system on
bases and tray slides
Delfield SCSC-60-EFP Standard Features
SCSC-60-EF: 4 cold pan LiquiTec™ serving counter, 60” long
The LiquiTec cold pan has two - six die stamped openings with depressed
edges, each well, holding one 12” x 20” pan (pans supplied by others)
Cold pan is fully insulated with foamed in place polyurethane insulation
environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global Warming Potential)
Stainless steel top and exterior body
Galvanized bottom
On/off switch mounted to exterior of unit
A maximum 10’ long cord and plug
All exterior panels reinforced with overlapping corners, welded in place
All body cutouts reinforced with channel supports
5” polyurethane swivel casters
Easy to use stainless steel interlock system is standard on base and
tray slides
Environmentally friendly HFC-404A refrigerant
Eutectic fluid completely surrounds each cold pan providing five sided
cooling
Meet NSF 7 with pans completely flush with counter
120V/60Hz/1ø, 10 amp convenience outlet with breaker*
Stainless steel trim strips
Stainless steel end drop shelf
Adjustable height casters
6” (15.2cm) high adjustable stainless steel legs
* Inclusion of these options will alter the electrical specifications of
the unit
Delfield SCSC-60-EFP Specification
Exterior body is constructed of 18-gauge stainless
steel side panels and 14-gauge galvanized bottom. All exterior side
panels are reinforced with overlapping corners and are welded in place.
All body cutouts are reinforced with 14-gauge galvanized channel
supports
Exterior top is constructed of 14-gauge stainless
steel, welded, ground and polished into one integral unit.
The LiquiTec cold panhas 2-6 die stamped 19.87" x
11.87" (50.5cm x 30.2cm) openings with depressed edges. Formed well
below each opening is 6.25" (15.9cm) deep with .5" drain mainfold to
gate valve. Each well, flush with the top, for flush mount pans to
accommodate 12" x 20" (30.5cm x 50.8cm) pans 4" (7.6cm) or 6" (15.2cm)
deep, supplied by others. Product temperatures of 33˚F (1˚C) to 41˚F
(5˚C) are maintained at 86˚F (30˚C) ambient room temperature, meeting
NSF7 requirements. The cold pan is separated from the exterior top by a
thermal break. Copper refrigeration tubing is attached to the sides of
every well. Eutectic fluid is used as the heat transfer medium. Cold pan
is fully insulated with foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane insulation.
Refrigeration system uses HFC-404A refrigerant and has
a self-contained 115 volt, 60 Hertz, single phase hermetically sealed
condensing unit with adjustable cold pan pressure control. Unit is wired
with a 3-wire, grounded, maximum 10’ (3m) cord and plug. Unit has an
on/off switch mounted on the exterior.
Casters:Unit is mounted on 5” (13cm) diameter swivel
casters with non-marking polyurethane tires and plate brakes. Overall
height of caster assembly is 6.00” (15cm).