The Delfield SH-3-NU Shelleysteel Mobile Heated Serving Counters
Why Use Delfield's Shelleysteel?
Shelleysteel’s rugged, welded stainless steel body stands up to everyday
abuse. This versatile equipment offers an almost unlimited selection of
laminate colors and designs to customize for your needs. Best of all, it’s
a cost-effective system that’s easy to modify over years of use.
Built to Last
Shelleysteel bases have a heavy, 18-gauge stainless steel exterior,
reinforced with overlapping 16-gauge corners that are welded in place. The
galvanized steel bottom adds extra rigidity and strength. Coved corners
protect the laminate from wear and tear and make cleanup easier.
Built to Suit You
Let Delfield create your ideal lineup. Select Shelleysteel bases in a
variety of custom lengths, with counter heights from 28 to 36 inches. Add
canopies, decal packages and other trim.
High Quality Construction
Bases are mobile and modular for greater versatility
18-gauge welded stainless steel body with structural integrity
5” polyurethane locking casters are standard
UL and NSF listed
Easy-to-use, stainless steel, fully retractable interlock system on
bases and tray slides
Delfield SH-3-NU Standard Features
Top has two to six electrically heated, recessed die stamped stainless
steel hot food warmers. Each warmer accommodates one 12” x 20” x 6” pan
SH units have heated under storage compartment, provided with removable
pan slides. SH-NU units have enclosed bases with no under storage
Single hot food wells standard with 1/2” stainless steel drain(s)
manifolded together to one main gate valve
Stainless steel top and exterior body
14-gauge galvanized bottom
Cord and plug are supplied standard
All exterior panels reinforced with overlapping corners, welded in place
All body cutouts reinforced with 14-gauge channel supports
All units are standard on 5” diameter polyurethane swivel casters for
easy cleaning
Easy access panel for quick replacement of heating element
One year parts and 90 day labor standard warranty
Delfield SH-3-NU Options & Accessories
Counter heights available from 28” to 36” in 2” increments
Tray slides and work shelves
Line-up interlock device
Food shields
Decal packages
Stainless steel overshelf
Incandescent light fixtures*
LED light fixtures*
Radiant or bullet style heat lamps*
120V/60Hz/1Ph, 10 amp convenience outlet with breaker*
Dry insert with door(s)
Stainless steel trim strips
Stainless steel end drop shelf
Adjustable height casters
6” (15cm) high adjustable stainless steel legs in lieu of casters
Laminate exterior panels
Energy saving power well (ESP)*
* Inclusion of these options will alter the electrical specifications of
the unit
Delfield SH-3-NU Specification
Exterior body is constructed of 18-gauge stainless steel side panels
and 14-gauge galvanized bottom. All exterior side panels are
reinforced with overlapping corners and are welded in place. All body
cutouts are reinforced with 14-gauge galvanized channel supports.
Exterior top is constructed of 14-gauge stainless steel, welded,
ground and polished into one integral unit. Top is fabricated with
square exterior corners. Top has two to six electrically heated,
recessed, die-stamped stainless steel hot food warmers. Each warmer
accommodates one 12.75” x 20.75” x 6” (32cm x 53cm x 15cm) pan.
Single hot food wells standard with 1/2” stainless steel drain(s)
manifolded together to one main gate valve
Heated food warmers are constructed of die-stamped stainless steel.
Heated food warmers are insulated on bottom. Each heated food
warmer is individually equipped with a heated element rated at 1000
watts for 120 volt or 208/230 volt, 60 hertz, single phase service and
wired to an adjustable control switch and indicator light in the control
panel. Heated food warmers are interwired to a maximum 10’ (3m)
long cord with a grounded plug for 120 volt or 208/230 volt, 60 hertz,
single phase electrical service.
Casters: Unit is mounted on 5” (13cm) diameter swivel casters with
non-marking polyurethane tires and plate brakes. Overall height of
caster assembly is 6.00” (15cm).
Optional Energy Saving Power wells(ESP) are
individually equipped with a heated pad on bottom and sides of well
rated at 500 watts for 208-230V or 240V. ESP wells provided with
individual solid state digital temperature control wired to one main
control panel with 4’ of conduit and wire. This option reduces energy
usage. ESP wells standard without drains. Optional drains available.