The Delfield SHC-74-NU Shelleysteel Mobile Hot and Cold Combination
Counters
Why Use Delfield's Shelleysteel?
Shelleysteel’s rugged, welded stainless steel body stands up to everyday
abuse. This versatile equipment offers an almost unlimited selection of
laminate colors and designs to customize for your needs. Best of all, it’s
a cost-effective system that’s easy to modify over years of use.
Built to Last
Shelleysteel bases have a heavy, 18-gauge stainless steel exterior,
reinforced with overlapping 16-gauge corners that are welded in place. The
galvanized steel bottom adds extra rigidity and strength. Coved corners
protect the laminate from wear and tear and make cleanup easier.
Built to Suit You
Let Delfield create your ideal lineup. Select Shelleysteel bases in a
variety of custom lengths, with counter heights from 28 to 36 inches. Add
canopies, decal packages and other trim.
High Quality Construction
Bases are mobile and modular for greater versatility
18-gauge welded stainless steel body with structural integrity
5” polyurethane locking casters are standard
UL and NSF listed
Easy-to-use, stainless steel, fully retractable interlock system on
bases and tray slides
Delfield SHC-74-NU Standard Features
Top has one to four electrically heated, recessed die-stamped stainless
steel hot food warmers.Each warmer accommodates a 12” x 20” x 6”
pan(pans supplied by others)
Insulated ice pan is 7” deep and constructed of 22-gauge stainless
steel. Perforated false bottom, and drain with valve is standard
Single hot food wells standard with 1/2” stainless steel drain(s)
manifolded together to one main gate valve
14-gauge stainless steel top
18-gauge stainless steel exterior body
14-gauge galvanized bottom
A maximum 10’ long cord and plug
Electrical connections are 60 hertz, single phase
All exterior panels reinforced with overlapping corners, welded in place
All body cutouts reinforced with 14-gauge channel supports
All units are standard on 5” diameter polyurethane swivel casters for
easy cleaning
Easy to use stainless steel interlock system is standard on base and
tray slides
Counter heights available from 28” to 36” in 2” increments
One year parts and 90 day labor standard warranty
SHC-74-NU: 1 hot well, 52” x 21.62” cold pan
Delfield SHC-74-NU Options & Accessories
Tray slides and work shelves
Line-up interlock device
Food shields
Decal packages
Incandescent light fixtures*
LED light fixtures*
Radiant or bullet style heat lamps*
Open understorage with shelf
120V/60Hz/1ø, 10 amp convenience outlet with breaker*
Stainless steel trim strips
Adjustable height casters
6” (15cm) high adjustable stainless steel legs in lieu of casters
Laminate exterior panels in lieu of stainless steel exterior panels
Energy saving power well (ESP)*
* Inclusion of these options will alter the electrical specifications of
the unit
Delfield SHC-74-NU Specification
Exterior body is constructed of 18-gauge stainless
steel side panels and 14-gauge galvanized bottom. All exterior side
panels are reinforced with overlapping corners and are welded in place.
All body cutouts are reinforced with 14-gauge galvanized channel
supports
Exterior top is constructed of 14-gauge stainless
steel, welded,ground and polished into one integral unit. Top has one to
four electrically heated, recessed, die-stamped stainless steel hot food
warmers. Each warmer accommodates a 12.75” x 20.75” x 6” (32cm x 53cm x
15cm) deep pan. Single hot food wells standard with 1/2”stainless steel
drain(s) manifolded together to one main gate valve
Heated food warmersare constructed of die-stamped
stainless steel. Each heated food warmer is individually equipped with a
heated element rated at 1000 watts for 120 volt or 208/230 volt, 60
hertz, single phase service and wired to an adjustable control switch
and indicator light in the control panel. Heated food warmers are
interwired to a 3 or 4-wire, grounded maximum 10’ (3m) long cord with a
grounded plug for 120 volt or 208/230 volt, 60 hertz, single phase
electrical service. Unit has an on/off switch mounted on the exterior.
Insulated ice pan is 7” (18cm) deep and constructed of
22-gauge stainless steel. A removable, peforated false bottom 1” (2.5cm)
high, constructed of stainless steel is supplied. The ice pan is
separated from the exterior top by a concealed breaker strip and fully
insulated with environmentally friendly, Kyoto Protocol Compliant, Non
ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential)
foamed-inplace polyurethane insulation. Ice pan is equipped with a drain
valve located at the bottom of the unit.
Casters:Unit is mounted on 5” (13cm) diameter swivel
casters with non-marking polyurethane tires and plate brakes. Overall
height of caster assembly is 6.00” (15cm).
Optional Energy Saving Power wells(ESP) are
individually equipped with a heated pad on bottom and sides of well
rated at 500 watts for 208-230V or 240V. ESP wells provided with
individual solid state digital temperature control wired to one main
control panel with 4’ of conduit and wire. This option reduces energy
usage. ESP wells standard without drains. Optional drains available.