The Delfield SHCR-74-BP Shelleysteel Mobile Self-Contained Hot/Cold Pan
Serving Counters
Why Use Delfield's Shelleysteel?
Shelleysteel’s rugged, welded stainless steel body stands up to everyday
abuse. This versatile equipment offers an almost unlimited selection of
laminate colors and designs to customize for your needs. Best of all, it’s
a cost-effective system that’s easy to modify over years of use.
Built to Last
Shelleysteel bases have a heavy, 18-gauge stainless steel exterior,
reinforced with overlapping 16-gauge corners that are welded in place. The
galvanized steel bottom adds extra rigidity and strength. Coved corners
protect the laminate from wear and tear and make cleanup easier.
Built to Suit You
Let Delfield create your ideal lineup. Select Shelleysteel bases in a
variety of custom lengths, with counter heights from 28 to 36 inches. Add
canopies, decal packages and other trim.
High Quality Construction
Bases are mobile and modular for greater versatility
18-gauge welded stainless steel body with structural integrity
5” polyurethane locking casters are standard
UL and NSF listed
Easy-to-use, stainless steel, fully retractable interlock system on
bases and tray slides
Delfield SHCR-74-BP Standard Features
Single hot food wells standard with 1/2” stainless steel drain(s)
manifolded together to one main gate valve
The refrigerated cold pan is 7” deep constructed of stainless steel.
Cold pan is equipped with a 1” drain with valve
14-gauge stainless steel top
18-gauge stainless steel exterior body
14-gauge galvanized bottom
Standard with enclosed bases
Top has one to four electrically heated, recessed die-stamped stainless
steel hot food warmers
Each warmer accommodates a 12” x 20” x 6” pan (pans supplied by others)
A maximum 10’ long cord and plug
All exterior panels reinforced with overlapping corners, welded in place
All body cutouts reinforced with 14-gauge channel supports
5” diameter polyurethane swivel casters for easy cleaning
Easy to use stainless steel interlock system is standard on base and
tray slides
SHCR-74-B: 1 hot well, 52” x 21.62” cold pan
Meets NSF requirements with 3” recessed pans
Environmentally friendly HFC-404A refrigerant
One year parts and 90 day labor standard warranty
Delfield SHCR-74-BP Options & Accessories
Tray slides and work shelves
Composite fold-down cutting board
Line-up interlock device
Glass front counter protector
Food shields
Stainless steel overshelf
Incandescent light fixtures*
LED light fixtures*
Radiant and bullet style heat lamps*
Open understorage with shelf
120V/60Hz/1ø, 15 amp convenience outlet with 10 amp breaker*
Stainless steel trim strips
Stainless steel end drop shelf
Adjustable height casters
Adjustable stainless steel legs
Adapter bars (specify length)
Laminate exterior panels
Energy saving power well (ESP)*
* Inclusion of these options will alter the electrical specifications of
the unit
Delfield SHCR-74-BP Specification
Exterior body is constructed of 18-gauge stainless
steel side panels and 14-gauge galvanized bottom. All exterior side
panels are reinforced with overlapping corners and are welded in place.
All body cutouts are reinforced with 14-gauge galvanized channel
supports
Exterior top is constructed of 14-gauge stainless
steel, welded,ground and polished into one integral unit. Top has one to
four electrically heated, recessed, die-stamped stainless steel hot food
warmers. Each warmer accommodates a 12.75” x 20.75” x 6” (32cm x 53cm x
15cm) deep pan. Single hot food wells standard with 1/2”stainless steel
drain(s) manifolded together to one main gate valve
Heated food warmersare constructed of die-stamped
stainless steel. Each heated food warmer is individually equipped with a
heating element rated at 1000 watts for 120 volt or 208/230 volt, 60
Hertz, single phase service and wired to an adjustable control switch
and indicator light in the control panel. Heated food warmers are
interwired to a maximum 10’ (3m) long cord with grounded plug for 115
volt or 208/230 volt, 60 Hertz, single phase electrical service
The refrigerated cold pan is 7” (18cm) deep and
constructed of stainless steel. The cold pan is separated from the
exterior top by a thermal break. Copper refrigeration tubing is attached
to the sides and bottom of the cold pan and is fully insulated with
foamed in place environmentally friendly, Kyoto Protocol Compliant, Non
ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential)
polyurethane insulation. Cold pan is equipped with a 1” (2.5cm) I.P.S.
drain with a drain valve located at the bottom of the unit. Temperatures
of 33°F (1°C) to 41°F (5°C) are maintained with pans recessed 2” (5cm)
at 86°F ambient room temperature. Pans rest on a stainless steel
bracket. (Pans by others.)
Refrigeration system uses HFC-404A and has a
self-contained 115 volt, 60 Hertz, single phase hermetically sealed
condensing unit with adjustable cold pan pressure control. Unit is wired
with a 3-wire, grounded, maximum 10’ (3m) cord and plug. Unit has an
on/off switch for the cold pan mounted on the exterior..
Casters:Unit is mounted on 5” (13cm) diameter swivel
casters with non-marking polyurethane tires and plate brakes. Overall
height of caster assembly is 6.00” (15cm).
Optional Energy Saving Power wells(ESP) are
individually equipped with a heated pad on bottom and sides of well
rated at 500 watts for 208-230V or 240V. ESP wells provided with
individual solid state digital temperature control wired to one main
control panel with 4’ of conduit and wire. This option reduces energy
usage. ESP wells standard without drains. Optional drains available.