The Delfield TT-1014 Mobile Open Frame Tray And Rack Dispensers
Delfield TT-1014 Specification
Framework
Framework shall be integrally welded 1.00” (2.5cm) O.D. 16-gauge stainless
steel tubing welded to a 16-gauge stainless steel base. Frame shall have
stainless steel horizontal support rods affixed to the tubing. Base shall
be reinforced with full-length 14-gauge stainless steel angles.
Casters
Unit shall have four 4.00” (10.2cm) diameter Polyurethane swivel casters
(all locking) (5.00” [12.7cm] ride height) and non-marking gray bumpers at
each corner.
Dispenser
Dispenser platform carries shall be 18-gauge stainless steel and shall be
removable for cleaning. Each dispenser shall have 2 self-leveling
mechanisms.
Self-leveling
Self-leveling mechanisms shall be field adjustable by adding or removing
stainless steel extension springs located inside the elevator housing.
Delfield TT-1014 Standard Features
Self-leveling mechanisms shall be adjustable by adding and removing
stainless steel extension springs located inside the elevator housing
TT-1014:One stack, 10”x14” trays
Tubing and base to be 16-gauge stainless steel
Tubing and base to be integrally welded
Base to be reinforced with 14-gauge stainless steel angles