Everest EBD3-CT 68" Club Top Direct Draw Keg Refrigerator, 3 Keg

Why use Everets Direct Draw Keg Refrigerator?

The multi-functional and varied capabilities of Everest's Bar Equipment series provides a solution for the beverage-service industry's every need. From customizable draft arms to easy-access, canned drink display and storage, or a hybrid of both - the application is robust as it is reliable. Equipped with the Blizzard R290 system, a fully self-contained and detachable condensing unit which uses natural, environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.

The Everest EBD3-CT Refrigeration System

• Side mounted R290 condensing unit uses environmentally friendly, EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP).
• Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
• Full-length air duct system ensures optimal circulation of cold air.
• Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
• High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.

Cabinet Construction And Door

• Heavy duty stainless steel countertop with textured laminate, black vinyl exterior.
• Galvanized steel interior walls and high quality stainless steel floor.
• 1 3/4" thick high density polyurethane insulation.
• Compact, easy-access club top compartment.
• Built-in caster thread receptacles for all models
• Textured laminate, black vinyl exterior and galvanized steel interior with 1 3/4” thick high density polyurethane insulation for doors. Heavy duty stainless steel exterior and galvanized steel interior with 3/4” thick high density polyurethane insulation for cub top lids
• Snap-in magnetic door gasket make cleaning and replacement an easy process.
• High strength, recessed door handles are recessed for doors and raised for club top lids.
• Pre-installed door locks keep your items safe from theft.
• Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.

Draft Arms And Temperature Control

• One single faucet and one dual faucet 3" diameter, stainless steel draft arms with matching air distributors. Fully insulated and NSF certified.
• One epoxy coated, steel wire shelf
• Height adjustable stainless steel clips.
• Multi-function digital controller with easy to read LED display.
• Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
• Audible overheat protection alarm for compressor and condenser coil.

From The Manufacturer

Club Top Direct Draw Keg Refrigerator, two-section, 68"W, 24.0 cu. ft. capacity, self-contained side mounted refrigeration, (2) solid hinged doors (locking), holds (3) 1/2 barrel kegs, (1) sliding club top lid, (1) epoxy coated wire shelf, (2) 3" diameter insulated stainless steel draft towers (NSF) with air distributor, (1) single & (1) dual faucet, stainless steel countertop & lid, digital controls with LED display, auto defrost, LED interior lighting, textured & laminated black vinyl exterior, galvanized steel interior wall & stainless steel floor, exterior drain port for excess top tray moisture, drain hose not included, floor drain required, R290 Hydrocarbon refrigerant, 1/4 HP, 115v/60/1-ph, 4.0 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation