Everest EBD4-CT 89" Club Top Direct Draw Keg Refrigerator, 4 Keg

Why use Everets Direct Draw Keg Refrigerator?

The multi-functional and varied capabilities of Everest's Bar Equipment series provides a solution for the beverage-service industry's every need. From customizable draft arms to easy-access, canned drink display and storage, or a hybrid of both - the application is robust as it is reliable. Equipped with the Blizzard R290 system, a fully self-contained and detachable condensing unit which uses natural, environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.

The Everest EBD4-CT Refrigeration System

• Side mounted R290 condensing unit uses environmentally friendly, EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP).
• Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
• Full-length air duct system ensures optimal circulation of cold air.
• Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
• High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.

Cabinet Construction And Door

• Heavy duty stainless steel countertop with textured laminate, black vinyl exterior.
• Galvanized steel interior walls and high quality stainless steel floor.
• 1 3/4" thick high density polyurethane insulation.
• Compact, easy-access club top compartment.
• Built-in caster thread receptacles for all models
• Textured laminate, black vinyl exterior and galvanized steel interior with 1 3/4” thick high density polyurethane insulation for doors. Heavy duty stainless steel exterior and galvanized steel interior with 3/4” thick high density polyurethane insulation for cub top lids
• Snap-in magnetic door gasket make cleaning and replacement an easy process.
• High strength, recessed door handles are recessed for doors and raised for club top lids.
• Pre-installed door locks keep your items safe from theft.
• Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.

Draft Arms And Temperature Control

• Two dual faucet, 3" diameter, stainless steel draft arms with matching air distributors. Fully insulated and NSF certified.
• One epoxy coated, steel wire shelf
• Height adjustable stainless steel clips.
• Multi-function digital controller with easy to read LED display.
• Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
• Audible overheat protection alarm for compressor and condenser coil.

From The Manufacturer

Club Top Direct Draw Keg Refrigerator, three-section, 89-1/4"W, 32.0 cu. ft. capacity, self-contained side mounted refrigeration, (3) solid hinged doors (locking), holds (4) 1/2 barrel kegs, (1) sliding club top lid, (1) epoxy coated wire shelf, (2) 3" diameter insulated stainless steel draft towers (NSF) with air distributor, (2) faucets per tower, stainless steel countertop & lid, digital controls with LED display, auto defrost, LED interior lighting, textured & laminated black vinyl exterior, galvanized steel interior wall & stainless steel floor, exterior drain port for excess top tray moisture, drain hose not included, floor drain required, R290 Hydrocarbon refrigerant, 1/3 HP, 115v/60/1-ph, 2.5 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation