Everest EBGR2 54" Two Section Reach-In Refrigerator w/ 2 Glass Full Doors, Bottom Mount, Stainless Steel, 50 cu. ft.

Why use Everets Refrigerator?

The series provides versatility in storage, display and temperature combinations in a traditional, bottom mounted design. It also features a deeper cabinet to meet the operator's specific storage needs. Patented vacuum relief valves in addition to conventional pressure relief mechanisms ensure rapid re-entry while keeping an airtight seal. Equipped with the Blizzard R290 system, a fully self-contained and detachable condensing unit which uses natural, environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.

The Everest EBGR2 Refrigeration System

• Bottom mounted, self-contained, fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
• Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
• Full-length air duct and airflow guard ensure optimal cold air circulation.
• Air circulation guard keeps floor vents from obstruction.
• Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
• High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning.
• Pressure relief devices allow rapid cabinet re-entry.
• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P

Cabinet Construction And Door

• Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
• Open spaced interior with no walls between compartments.
• Galvanized steel top, bottom and rear.
• 2.5" thick high density polyurethane insulation.
• Four 5" swivel casters with locks on front set and two front leg stabilizers.
• Low emissivity double glass panes reflect UV rays for efficient cooling.
• Matte finish aluminum door frames.
• Frame heaters prevent exterior moisture build up.
• Self-closing with adjustable torsion system for a positive seal.
• Snap-in magnetic door gasket make cleaning and replacement an easy process.
• High strength, die-cast door handles.
• Pre-installed door locks keep your items safe from theft (from 2017 production).
• Field reversible.
• Shielded LED bar lighting with on/off switch provides bright, high color illumination at lower heat output

Shelving And Temperature Control

• Four epoxy coated, steel wire shelves per section.
• Height adjustable stainless steel clips.
• Multi-function digital controller with easy to read LED display.
• Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
• Audible overheat protection alarm for compressor and condenser coil.

From The Manufacturer

Reach-In Refrigerator, two-section, 54-1/8"W, 50.0 cu. ft. capacity, self-contained bottom mounted refrigeration, (2) full-height glass hinged self-closing field reversible doors (locking), (8) epoxy coated wire shelves, height adjustable clips, digital controls with LED display, auto defrost, LED interior lighting with on/off switch, stainless steel interior, stainless steel sides, galvanized steel top, bottom & rear, (2) leg stabilizers, (4) 5" swivel casters (2 locking), R290 Hydrocarbon refrigerant, 3/4 HP, 115v/60/1-ph, 7.0 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation