Everest EBR2 54" Two Section Reach-In Refrigerator w/ 2 Solid Full Doors, Bottom Mount, Stainless Steel, 50 cu. ft.

Why use Everets Refrigerator?

The series provides versatility in storage, display and temperature combinations in a traditional, bottom mounted design. It also features a deeper cabinet to meet the operator's specific storage needs. Patented vacuum relief valves in addition to conventional pressure relief mechanisms ensure rapid re-entry while keeping an airtight seal. Equipped with the Blizzard R290 system, a fully self-contained and detachable condensing unit which uses natural, environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.

The Everest EBR2 Refrigeration System

• Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing
• Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption
• Full-length air duct system and airflow guard ensure optimal circulation of cold air.
• Time-initiated and temperature-terminated auto defrost heater.
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
• High performance condenser fan motors ensure efficient compressor ventilation. R290 models use auto-reverse condenser fan motors which also support condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
• Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.

Cabinet Construction And Door

• Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
• Galvanized steel top, bottom and rear.
• 2.5" thick high density polyurethane insulation.
• Deeper cabinet interior for more storage options.
• Four 5" swivel casters with locks on front set and two front leg stabilizers.
• Heavy duty stainless steel interior / exterior.
• 2.5" thick high density polyurethane insulation.
• Frame heaters prevent exterior moisture build up.
• Self-closing with adjustable torsion system for a positive seal.
• Snap-in magnetic door gasket make cleaning and replacement an easy process.
• High strength, recessed door handles.
• Pre-installed door locks keep your items safe from theft.
• Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.

Shelving And Temperature Control

• Three epoxy coated, steel wire shelves per section.
• Height adjustable stainless steel clips.
• Multi-function digital controller with easy to read LED display.
• Factory preset temperature, -4°F. Temperature setting range from -10°F to 54°F.
• Audible overheat protection alarm for compressor and condenser coil

From The Manufacturer

Reach-In Refrigerator, two-section, 54-1/8"W, 50.0 cu. ft. capacity, self-contained bottom mounted refrigeration, (2) full-height solid hinged self-closing field reversible doors (locking), (6) epoxy coated wire shelves, height adjustable clips, digital controls with LED display, auto defrost, LED interior lighting, stainless steel interior, stainless steel front & sides, galvanized steel top, bottom & rear, (2) leg stabilizers, (4) 5" swivel casters (2 locking), R290 Hydrocarbon refrigerant, 1/3 HP, 115v/60/1-ph, 3.0 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation