Everest Refrigeration EBWR1-LAB 29" Medical Refrigerator w/ 1 Solid Full Door, 23.0 cu. ft.

Refrigeration System

• Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
• Inverter compressors offer consistent cooling, accurate temperature control, and up to 20% less energy usage.
• Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
• Glycol-filled temperature probe ensures accurate temperature readings.
• Full-length air duct and airflow guard ensure optimal cold air circulation.
• Air circulation guard keeps floor vents from obstruction.
• Time-initiated and temperature-terminated auto defrost heater.
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
• High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning.
• Pressure relief devices allow rapid cabinet re-entry.
• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.

Cabinet Construction

• Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
• Open spaced interior with no walls between compartments.
• Galvanized steel top, bottom and rear.
• 2.5" thick high density polyurethane insulation.
• Deeper cabinet interior for more storage options.
• Four 5" swivel casters with locks on front set.
• Leg stabilizers standard for all models

Lighting

• Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.

Doors

• Pre-installed electronic keypad lock with auto-lock feature.
• Heavy duty stainless steel interior / exterior.
• 2.5" thick high density polyurethane insulation.
• Frame heaters prevent exterior moisture build up.
• Self-closing with adjustable torsion system for a positive seal.
• Snap-in magnetic gasket for ease of cleaning.
• High strength, recessed handles.
• Field reversible.

Shelving

• Three epoxy coated, steel wire shelves per section.
• Height adjustable stainless steel clips.

Temperature Control

• Multi-function digital controller with easy to read LED display.
• Factory preset temperature, 35°F. Temp-set range from 32°F to 54°F.
• Audible overheat protection alarm for compressor and condenser coil.

From The Manufacturer

Laboratory Refrigerator, one-section, 29-1/4"W, 23.0 cu. ft. capacity, self-contained bottom mounted refrigeration, (1) wide full-height solid hinged self-closing field reversible door with elecronic keypad lock, (3) epoxy coated wire shelves, height adjustable clips, digital controls with LED display, auto defrost, LED interior lighting, stainless steel interior, stainless steel front & sides, galvanized steel top, bottom & rear, (2) leg stabilizers, (4) 5" swivel casters (2 locking), R290 Hydrocarbon refrigerant, 1/3 HP inverter compressor, 115v/60/1-ph, 1.2 amps, cord, NEMA 5-15P, cETLus, ETL-Sanitation