All covers will be fastened to a base plate by two chrome plated tamper-proof bolts.
Cover shall be one of the following:
Die-cast zinc alloy - One-piece, heavy-duty, rib-reinforced, lightweight,
unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or
finished with chip-proof, electrostatically applied epoxy paint.
Bulk Molding Compound (BMC) – White reinforced thermoset resin.
Stainless Steel – with a brushed finish.
Special Image – Digital image applied to die-cast or stainless steel covers using
patented Kolorfusion Sublimation Decoration process.
Base plate shall be equipped with (3) 7/8" (22 mm) diameter holes, the bottom one is
suitable for use with surface conduit.
All internal parts shall be coated according to Underwriters' Laboratories, Inc.
requirements
Motor shall be a thermally protected, series commutated, through-flow discharge
vacuum motor/blower (5/8 hp / 20,000 rpm) which provides air velocity of up to
19,000 LFM (linear feet per minute) at the air outlet and 16,000 LFM at the hands (4
inches [102 mm] below air outlet). Includes a washable metal mesh filter for more
reliable performance
Heating element (970 w) is constructed of Nichrome wire and mounted inside the blower
housing, thereby being vandal resistant. It shall be protected by an automatic resetting
thermostat, which shall open whenever air flow is cut off and shall close when flow of
air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C)
ambient room temperature at the hands (4 inches [102 mm] below air outlet).
Control assembly is activated by an infrared optical sensor located next to the air outlet.
The dryer shall operate as long as hands are under the air outlet. Control includes a speed
and sound control mechanism, adjustable heat control with High, Medium, Low and Off
settings and a filter sensor which is activated should the filter become clogged. There is
a 35-second lockout feature if hands are not removed. Sensor equipped with externally
visible Red LED light that flashes error codes to assist in troubleshooting.