Contactless portable hand sink with water heater is self-contained to
allow safe hand washing and sanitizing in remote locations
FWE HS-24-ES Standard Features
FWE’s contactless portable hand sinks are perfect for any location,
making it possible to offer practical hand washing when it is needed to
meet safety standards
Faucet and soap dispenser both have highly responsive, automatic motions
sensors for safe and touchless hand washing
Made for transport applications - FWE hand sinks are fully constructed
of stainless steel and equipped with heavy-duty maintenance free casters
Marine top edge and backsplash prevent spills and drips while on the
move
Provided with a 5 gallon fresh water tank for consistent draw and a 7
gallon waste water tank to hold drainage
Water heater with adjustable thermostat (65°-145°F) quickly warms water
for dispensing when needed
Lockable door prevents unauthorized access for safety and security
Paper towel holder and cord exit can be easily moved to either side,
providing flexibility in field placement (only one cord exit on
HS-24-ES)
FWE HS-24-ES Specifications
CONSTRUCTION. Heliarc welded, single unit construction of 20 gauge
stainless steel with easy-to-clean coved corners. Front edge shall have
raised marine nosing to contain water. Backsplash shall be 8.5" high
DOORS AND LATCHES. Flush mounted, stainless steel door. Full length
magnetic recessed workflow handle with locking cam latch. Heavy duty pin
style hinges.
CASTERS. Maintenance-free polyurethane tire casters in a configuration
of two (2) rigid and two (2) swivel with brake.
WATER CAPACITY. The unit shall include one (1) five gallon fresh water
tank and one (1) seven gallon waste water tank. Electric water heater
with adjustable thermostat provides a temperature range of 65°-145°F
(19°-62°C) and heats up to 2.7 gallons of water. Glass insulated tank
for thermal efficiency and fast recovery
FAUCET CHARACTERISTICS. Faucet shall be motion activated and powered by
four (4) AA Batteries. Faucet shall have a concealed thermostat control.
Faucet water pressure shall be two (2) gallons per minute.
SOAP DISPENSER CHARACTERISTICS. Soap dispenser shall be motion activated
and shall be powered by four (4) D batteries. Recommended soap refill:
Rubbermaid FG4015411 800ml.
ELECTRICAL CHARACTERISTICS. 3 wire grounded 10 foot extension power cord
and plug. HS-24 cord and plug are fed through right side cord exit.
Alternative left side cord exit provided. HS-24-ES cord and plug are fed
through the front of the unit only. See electrical data chart above for
amperage and receptacle configuration.
OVERALL EXTERIOR DIMENSIONS IN. (mm) : 44.25″ (1131) h x 24.5″ (623)d x
24.75″ (629)w
The image above may not exactly represent the product
