FWE PHTT-CC-202-MW Insulated Mobile Heated Cabinet
Why use FWE PHTT-CC-202-MW Insulated Mobile Heated Cabinet ?
Refrigerators designed for transport, satellite operations, and on-site
catered events, as well as backup for buffets and cafeterias - Euro style
adjustable shelves for greater flexibility
FWE PHTT-CC-202-MW Standard Features
Designed by FWE to expand your "combination oven's" flexibility and
maximize produciton capacity while holding sensitive foods longer.
Simply transfer full size roll-in-rack to free up your oven and keep
foods at desirable taste and texture.
Ultimate control - simple, color coded controls allow you to
independently set relative humidity (0-90%) and temperature (90-200°F /
32-93°C). Includes low water and low temperature indicator lights with
option to turn on audible alarm
Fast recovery - Clymate IQ® returns to set temperature quickly and
features self-closing hinges, so you don’t have to worry about losing
heat and humidity if you open and close the door repeatedly during peak
service times
Consistency throughout - All Clymate IQ® cabinets feature unique
push/pull air distribution system that provides uniform temperature and
humidity throughout the unit
Place the unit anywhere - all units come with a tri-directional AC cord
pocket to give you a better plug placement
Unmatched ease of cleaning - the exclusive large volume, removable water
pan makes clean up a breeze - just pull out the pan and lift up the
heating element for easy cleaning
FWE PHTT-CC-202-MW Specifications
CONSTRUCTION. Heliarc welded, single unit construction of stainless
steel; 20 gauge polished exterior, 22 gauge stainless steel interior
with easy-to-clean coved corners. Welded tubular base frame shall be 1”
square, heavy gauge stainless steel tubing, with 10 gauge stainless
steel reinforcing stress plates at corners.
INSULATION. “Ultra-Guard” UG-26 high density fiberglass insulation
throughout; top, back, bottom, sides and doors.
HANDLES. Heavy-duty, 1" diameter tubular stainless steel push handles,
mounted on each side and one rear horizontal mounted tubular handle
standard on mobile
DOORS AND LATCHES. Flush mounted, stainless steel insulated doors shall
be selfclosing and field reversible. High temperature gasket sealed;
gasket shall be cabinet mounted. Magnetic work flow door handle shall be
full length, vertical, and positive closing. Each door shall have two
(2) heavy-duty edgemount die cast hinges. Standard with dutch doors.
Dutch door: two (2) half size doors.
STATIONARY COMBI-COMPANION LEGS. Heavy-duty stainless adjustable legs,
each mounted to a 10 gauge reinforcement plate, which is welded to an 18
gauge tubular base frame.
MOBILE COMBI-COMPANION CASTERS. Maintenance free polyurethane tire
casters in a configuration of (2) rigid (2) swivel with brake. Casters
shall have a reinforced yoke mounted to 10 gauge caster plate. The
caster mounting plate shall be secured to a 10 gauge stainless steel
reinforcing stress plate via welded in place stainless steel studs. The
reinforcing stress plates shall be welded to the heavy gauge tubular
frame of the unit.
PHTT SYSTEM/CONTROLS. Built in humidified holding system shall include
two (2) separate long life Incoloy nickel-chromium alloy heating
elements per cavity to provide separate, adjustable, precise food
temperature from 90°F to 200°F (32°C to 93°C) and maintain food texture
with settings from 0 to 90% RH (Crisp to Moist). Patented Precise
Humidity Temperature Technology controls shall be provided for each
function. One to control the interior air temperature, and one to
control the interior air moisture with hydro immersion water bath.
Stainless steel water reservoir shall be removable for ease of
cleaning/sanitation. Built-in drip trough has removable drain plug.
System shall have circulating fan to assist heat recovery/moist air
distribution. Controls shall be up-front, recessed and eye-level for
convenience and safety. ON/OFF power switch, humidity cycle light and
thermostat cycling light shall also be included.
ELECTRICAL CHARACTERISTICS. 3 wire grounded tri-directional power cord
and plug, rear mounted for safety. See electrical data chart above for
amperage and receptacle configuration. See electrical data chart for
models that may require a dedicated circuit.
OVERALL EXTERIOR DIMENSIONS IN. (mm) : 81"
(2058)h x 37.5" (953)d x
36.25" (921)w