Why use FWE URS-14-GN Mobile Refrigerated Cabinet ?
Refrigerators designed for transport, satellite operations, and on-site
catered events, as well as backup for buffets and cafeterias - Euro style
adjustable shelves for greater flexibility
FWE URS-14-GN Standard Features
Ultra-Universal Series accommodates a wide variety of plates, preplated
meals, 12” x 20” pans and GN containers. Shelves are adjustable to
change with your operation, flexible menu or catering event. The
possibilities are endless!
Made for transport applications - FWE cabinets are fully constructed of
stainless steel, with a tubular welded base frame, and designed to
absorb vibration and shock during transport
Exclusive Food Sentry recessed, electronic controls, with digital
display, are easy to set and read, providing operators ultimate
performance and accurate cabinet temperatures
Heavy duty bottom mounted compressor assembly and integrated casters
provide a low center of gravity - allows for easy and safe transporting
High-efficiency, condensing unit and coil - assures rapid "pull down"
and recovery
Heavy duty “no sag” shelves are removable to facilitate thorough
cleaning
All models are fully insulated throughout the cabinet and door -
provides enhanced energy efficient refrigeration. URS-7-GN and URS-10-GN
models are Energy Star Approved
Continuously intuitive self-defrosting cold system with on demand
override - makes operation convenient and user-friendly
FWE URS-14-GN Specifications
CONSTRUCTION. Heliarc welded, single unit construction of stainless
steel; 20 gauge polished exterior, 22 gauge stainless steel interior
with easy-to-clean coved corners. Welded tubular base frame shall be 1”
square, heavy gauge stainless steel tubing, with 10 gauge stainless
steel reinforcing stress plates at corners.
INSULATION. High efficiency insulation throughout cabinet and door.
HANDLES. On single door models, full size, form-fitting recessed
antimicrobial hand grips shall be mounted on each side of cabinet. Rear
mounted tubular push pull handle. On two door models there shall be
heavy-duty push bar handles, solid formed 1" x .375" thick; mounted at
each end of unit. Mountings reinforced with stainless steel channel.
BUMPER. Solid continuous wraparound aluminum channel, bolted to frame,
with snapin, non-marking replaceable vinyl cushion. Full perimeter
bumper extends beyond doors,handles, etc., for added protection. Shall
be continuous with corner cut-outs to facilitate cleaning.
DOORS AND LATCHES. Flush mounted, stainless steel insulated doors shall
be gasket sealed. Each door shall have two (2) heavy-duty edgemount die
cast hinges. Door latch shall be edgemounted, full grip and positive
closing. The hinge and latch mountings are reinforced with stainless
steel backing plates.
CASTERS. On single door models there shall be maintenance free
polyurethane casters in a configuration of two (2) rigid and two (2)
swivel with brake. On two door models there shall be a configuration of
two (2) rigid and four (4) swivel with break. Casters shall have a
reinforced yoke mounted to 10 gauge caster plate. The caster mounting
plate shall be secured to a 10 gauge stainless steel reinforcing stress
plate via welded in place stainless steel studs. The reinforcing stress
plates shall be welded to the heavy gauge tubular frame of the unit.
SHELVES. Stainless steel shelves shall be removable and adjustable.
Shelves shall be supported by high strength, removable pair of one piece
stainless steel racks with fixed spacings (see chart above for
spacings). One piece rack is easy to remove without the use of tools for
cleaning
COLD-TEMP SYSTEM/CONTROLS. Single door units shall have a 1/4 HP
Hi-torque condensing unit. Double door units shall have a 1/2 HP
Hi-torque condensing unit. The air-cooled closed system has a three
pound receiver charged with environmentally safe ANSI/ASHRAE Standard
34-1992 Safety Group Classification (A1) 450A refrigerant. A thermal
expansion valve (for pressure control) also a filter dryer. Controls
shall include an easy to read digital display for cabinet temperature
(with recall capability of temperature set point and actual cabinet
temperature). Easy to read master ON/OFF button with power indicator
light, cooling cycle indicator light, on-demand defrost with a defrost
cycle indicator light. Adjustable temperature range from 33°F to 38°F
(.5°C to 3.3°C) factory preset temperature is 38°F (3.3°C).
ELECTRICAL CHARACTERISTICS. 3 wire grounded 8-10 foot extension power
cord and plug, rear mounted for safety. See electrical data chart above
for amperage and receptacle configuration.
OVERALL EXTERIOR DIMENSIONS IN. (mm) : 66.25" (1683)h x 33.5" (851)d x
63" (1601)w