Garland US Range HOIN1500 Built-In / Drop-In Induction Range
Garland HOIN1500 Standard Features
A generator, developed specifically for heat retaining/holding, built in an aluminum enclosure, which includes an integrated air fan.
Fresh air is supplied by the fan, located at the bottom of the unit. The unit is also equipped with an air guiding system that directs the hot air out of the housing. Not adhering to air circulation guidelines in the installation manual will impact the perfomance of the unit.
Cable mains 1.8M (5.90’).
The heat retaining plate is equipped with the latest RTCSmp sensor technology which enables temperature controls in real-time. The set temperature is displayed via a 7-segment display underneath the Ceran glass. The heat retaining plate includes five (5) temperature sensors per zone. The unit has two zones that can be controlled at different temperatures.
Space saving and compact construction with a Ceran glass on top of the unit, that allows the installation of the unit in shallow cabinets.
The control switch consists of a chrome sheet metal cover with a built in power switch. The power switch is enclosed in polymer housing, with high resistance to external impacts. The control switch is connected with the generator via an RJ45 cable which is 1M (3.28’).
The control unit regulates the temperature in an increment of 5°F (1°C) and this from 122-212°F (50 to100°C). The set temperature and the current temperature are shown via the 7-segment display that is located underneath the Ceran glass.
RTCSmp electronic temperature control that monitors the state of the induction coil, power board, CPU and the Ceran glass temperature.
RTCSmp monitors the energy supply
No Pan No Heat – Only if an induction suitable pan is located on the glass that energy will be consumed.
Garland HOIN1500 Specifications
Cut out: 31.8”x16”x4.7” (808x408x120 mm)Qty. of heat retaining zones: 2