Grindmaster-UNIC-Crathco Mid Line Urn Pump Type Brewing System
STANDARD FEATURES:
Pump Type Brewing System
Water is heated in large water storage compartment. When brew
button is activated, hot water is pumped over the coffee grounds
through American’s specially designed solid cone spray nozzle thus
providing the most uniform extraction possible from the coffee bed.
All A.I.S.I. Type 304 18-8 Stainless Steel Construction
One Button Fool-Proof Operation
Toggle switch selection for half and full batch. Brew time can be
changed by adjusting the setting concealed on the front panel. Adjust
with screwdriver through front panel. Stop sprayover with one touch.
Automatic Coffee Agitation
Thoroughly mixes coffee after sprayover stops.
Automatic Refill of Water Compartment
Assures unlimited supply of hot water, always available.
Closed Chamber Brewing
Prevents escape of coffee vapors. Brews with NSF approved cover on
brew basket. Prevents costly steam/moisture loss to atmosphere. Saves
energy with savings on air conditioning load.
Special Pinpoint Control Thermostat
Four position temperature selection on thermostat controls. The four
temperature controls are Brew (200°F), Hold (180°F), Night Stand-by
(160°F) and OFF.
Velvet Smooth Spray Arm
Special Teflon® coating on spray arm piston prevents liming and
insures smooth operation. Positive “stops” on spray arm for
operator safety.
Adjustable Bypass on Spray Arm
Enables proper brew extraction even with variations caused by treated
water or different coffee blends.
Low Water Cutoff System
Solid state probe sensor system provides positive protection against
heater burnout, at start-up or in operation.
One Stainless Steel Brew Basket
With 25 filter papers.
Control Box on Right Hand End
If requested, the control box can be located on the left hand end of urn.
Greatest Safety for Operator (OSHA)
All controls operate on 120 volt.
Drain in Bottom with Hose Connection Allows faster access for service.
Flexible Leads to Pump When necessary, pumps can be changed in a matter of minutes with our exclusive flexible hose system.
Fast Initial Fill Rate Valve Saves time filling urn during installation.