Groen DL-80 Tilting Direct Steam Kettle

Groen DL-80 Tilting Direct Steam Kettle


Groen DL-80 Tilting Direct Steam Kettle

Disclosure The image above may not exactly represent the product


Call or Chat Call or Chat

Tilting Kettle, direct steam, 80-gallon capacity, crank tilt, 2/3 jacket, 316 stainless steel liner, tri-leg base, stainless steel construction, flanged feet, 25 PSI, Made in USA


Product PDF


Made in USA

Groen DL-80 Specs

Brand Groen
Model Number DL-80
Weight 295 lbs
Width 49"
Depth 39.25"
Height 48"
Certifications Made in USA, NSF
Tilt manual tilt
Base tri-leg
Kettle Liner 316 stainless steel
Kettle Jacket partial jacket



  • CONSTRUCTION: Kettle shall be of 18.8 type 304 stainless steel exterior with solid one-piece welded construction and 316 stainless steel interior. Unit shall be furnished with a heavy reinforced bar rim with a continuous seal weld on the underside to ensure maximum durability and sanitation. Unit provided with faucet bracket as standard.
  • FINISH: Kettle interior shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a bright high buff finish, ensuring maximum ease in cleaning and maintaining brilliant appearance.
  • ASME CODE: Unit shall be ASME shop-inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 25 PSI.
  • SANITATION: Unit shall be designed and constructed to be NSF-listed, meeting NSF and all known health department and sanitation codes.
  • DRAWOFF: Kettle shall have a 2” sanitary tangent drawoff which is a 316 stainless steel compression disc drain valve, for easy disassembly without tools. Larger 3” drawoffs available. The drain outlet shall be equipped with a removable 1/4” perforated stainless steel strainer.
  • COVER: Cover shall be one piece stainless steel dome shaped cover, hinged and counterbalanced, with No. 51 spring assisted cover actuator.
  • STEAM PRESSURE: Kettle shall operate dependably at any steam pressure between 5 and 25 PSI. Higher working pressures available.
  • MOUNTING: Kettle shall be mounted on stainless steel, tubular legs, continuously welded to kettle, with stainless steel adjustable floor flanges.
  • INSTALLATION: Remote steam source required. Steam trap assembly is required and not provided unless ordered as an option. See dimension on other side for steam inlet size and number
  • ORIGIN OF MANUFACTURE: Designed and manufactured in the United States.
Write Your Own Review
You're reviewing:Groen DL-80 Tilting Direct Steam Kettle
Your Rating