Hatco Merchandisers keep hot foods at optimum temperatures and the focus
on the products, while providing unlimited flexibility for each operator’s
unique foodservice needs
Ideal for cafeterias, catering, clubs & bars, concessions, convenience
stores, restaurants & cafés, and supermarkets & delis
Available with slant or horizontal shelves-Available with single, dual,
triple or quadruple shelves
Hot Food Holding
Hold a variety of hot wrapped or boxed foods at ideal serving temperatures
while maintaining product quality
Combining a pre-focused infrared top heat and thermostatically-controlled
heated base guarantees optimal holding times
Indicating Temperature Control (ITC) enhances accuracy and provides
digital readout of temperatures
Shelves available as cold-only to keep pre-chilled food products in the
perfect chill zone for serving
Show And Sell
Create impulse sales and provide selfserve convenience by placing the food
products at the customers’ fingertips
Keep the customers’ focus where it belongs – on the product – with
full-view designs
Sign holders help merchandise food products
In The Zone
Instant-on, individually-zoned overhead ribbon elements are combined with
heated shelves with separate front and rear heating elements,
significantly reducing energy consumption
Spot-On Technology turns overhead heat on only when product is present in
that zone, while the base heat goes from energy-saving mode to the set
temperature
High Performance
For self-serve operations, the Hatco Glo-Ray Heated Glass Merchandising
Warmers increase holding capacities and impulse sales. Featuring Hatco’s
patented heated glass shelves, product is placed at customers’ fingertips,
while allowing them to view all their choices at once. Designed
specifically to hold hot wrapped or boxed product at proper serving
temperatures.
Hatco GR3SDS-27 Standard Features
The transparent shelf utilizes a patented heated glass, which radiates
heat down while conducting heat up, allowing you to hold foods longer
and safer at optimum serving temperatures
The top shelf can be used to display short-term held food for which
serving temperature is not critical, providing extra capacity while
using the same amount of counterspace
Not to be installed closer than 3" (76 mm) to a back wall
NSF requires units over 36" (914 mm) in width or weighing more than 80
lbs. (36 kg) to be either sealed, or raised on the installation surface
with the 4" (102 mm) legs included
Standard units shipped with: thermostatically controlled hardcoated
heated base and glass shelf with dual heat source. Also tempered glass
side panels, product divider rods, LED display lights and a 6' (1829 mm)
cord and plug
The image above may not exactly represent the product
