Hickory Industries, Inc. N/3GS Rotisserie Gas Oven

Standart Features

• Side hinge cover- covers gas components for a clean look
• Continous cooking
• Large wall of product merchandising
• Individual gas control per burner
• Large drip pan for catching drippings
• Safety wire grid on bottom of rotissiere
• Gear mechanism out side of heat & grease zone

Specifications

• Ventilation : Electric units do not normally require air evacuation. However since the surrounding environment may get hot, a hood may be useful. Gas units must be vented under a hood..
• Drive Mechanism : Gear reduction - Motor worm drives fiber gear on base of shaft, shaft has individual worm gears which drive the spits. Drives are located on both side.
• Installation Requirements : Licensed electrician, licensed gas fitter for all gas connections and checkout. HVAC specialist for air evacuation. Placement of this machine is critical since it is hot. Plan carefully.
• Front Facings : Machine is made with high grade polished stainless. No screw fittings appear on the front facing. For an additional charge, facings can be painted to desired color with brass trim.
• Service, Maintenance, and Construction : All panels, accessing fat collection areas, are made from high grade, acid resistant, stainless steel. The unit employs few moving parts which reduces probability of breakdowns. Angle iron construction ensures a durable long life. Motor and gear drives are easily accessible. Unit is on casters for ease of movement when clean up is required. Unit is fully plumbed and requires a single gas connection. No oiling or greasing is required for any part.
• Safety : All burners are actuated by safety pilots and manifolds. Large drip drawers below the heat source prevent fat fires. Frontal glass reduces worker exposure to excess heat. Individual controls to control each burner, motors, and lamps.

From The Manufacturer

Gas Rotisserie Oven, 3-spit, 9-12 chicken capacity, manual control, w/interior display lighting, sliding tempered glass doors standard, stainless steel and 5" castors, Can be placed on legs for countertop use. 80,000BTU, NSF, Made in USA