Resources
Brand | Imperial |
---|---|
Model Number | IFS-75-OP |
Weight | 270 lbs |
Width | 19.5" |
Depth | 34.5" |
Height | 45.75" |
Power Type | gas |
Installation Type | floor model |
Tank & Pot Type | full pot |
Gas Type | NG or LP |
Number of Fry Pots | 1 |
Total BTU | 175 |
Exterior Finish | stainless steel front & sides |
Burner Style | open pot |
Controls | thermostatic controls |
Type | restaurant |
Filter | no filter |
Fry Pot Construction | stainless steel |
Basket Lifts | no basket lifts |
Fat Capacity (lbs) | 75 |
This Imperial IFS-75-OP full pot gas fryer features an open frypot design with a large heat transfer area, deep cold zone to capture and keep particles out of the fry area. The fry area, deep cold zone and radius formed edges are easy to clean and maintain. This model features precision welded frypots to virtually eliminate leaks. The Imperial IFS 75 full pot gas fryer features an all stainless-steel exterior except for the back, a stainless steel frypot, large nickel plated fry baskets, vinyl coated basket handle, fine mesh crumb screen, full heat shield behind the control panel, double panel door, recessed bottom for drain access, a 1 ¼" full port drain valve and plate mounted legs. Be sure to take a look at Chef"™s Deals complete line of Imperial gas fryers.
Burners located outside the frypot
- Flame heats stainless steel plates located strategically outside of the frypot
- Intense heat rapidly heats stainless steel sides and oil inside
- 175,000 BTU (51 KW) total gas output
- No tube fired burners and no air shutter adjustments needed
- Snap acting thermostat has a 200° F - 400° F (93° C-204° C) temperature range
- Heats oil quickly
- Extends oil life producing a uniformly cooked product
- 100% safety shut-off valve
Open frypot design
- Easy to clean both the fry area and deep cold zone
- Radius formed edges are easy-to-clean
- Large heat transfer area
- Deep cold zone captures and holds particles out of the fry area
- 18" x 18" (457 x 457 mm) frying area
- Frypot has a 75 lb. (41 L) oil capacity
Precision welded frypots
- Radius formed edges precision welded robotically on the outside of the frypot for accuracy and consistency
- Virtually eliminates leaks
Exterior features
- Stainless steel exterior, except back
- Stainless steel frypot
- Large nickel-plated fry baskets
- Vinyl-coated basket handle
- Fine mesh crumb screen
- Full heat shield behind control panel
- Double panel door
- Recessed bottom for drain accessibility
- 1-1/4" (32 mm) full port drain valve
- Full bottom structural support
- Plate mounted legs