Admiral Dishwasher, conveyor type, high temperature, no booster, single tank with power wash & prewash section, CrossFire® wash system, approximately (233) racks/hour capacity, stainless steel frame, legs & feet, electric immersion or steam injector tank heat
Insinger ADMIRAL 66-4 65" Conveyor Type Dishwasher
Insinger ADMIRAL 66-4 Standard Features
Automatic conveyor, rack type, single tank dishwasher with recirculating
pre-wash and wash and fresh water final rinse.
0.63 gallons per rack at 20 PSI
Capacity is 233- 20" x 20" racks per hour or 5,825 dishes per hour
CrossFire® Wash System provides superior cleaning
Telescoping insulated doors—no issues with low ceiling heights
Wide access doors make daily maintenance easy and efficient
Error proof replacement with color-coded curtains
CrossFire® Wash System
Telescoping insulated doors
Manifold cleanout brush
S/S 304 stainless steel construction
Automatic tank fill
Low water protection
Detergent connection provision
Elevated top mounted NEMA 12 control panel
Door safety switches
Standard frame drip proof motors
Override switch for de-liming
SureFire™ Start-Up & Check-Out Service
Ventilation fan connection provision
End caps/pipe plugs secured to prevent loss
Timing belt conveyor drive
Insinger ADMIRAL 66-4 Specifications
CONSTRUCTION- Hood and tank constructed of 16 gauge type 304 S/S. Hood
unit of all welded seamless construction. S/S frame, legs and feet. All
internal castings are non-corrosive lead free nickel alloy, bronze or
DOORS- Zero-Infringement Doors are extra large die formed, type 304 S/S,
double-walled, insulated, front inspection doors. The vertically opening
doors with spring assist, glide in full length tracks on either side.
Automatic safety catch at full open locations.
CONVEYORS- One S/S roller chain conveyor, with rack driving lugs every
sixth link, running along the front of the machine. Twelve free spinning
rollers placed along the back wall of the machine. Conveyor accommodates
all standard 20" racks. Conveyor drive system includes direct drive gear
motor with frictionless, troublefree clutch system, spring-loaded and
automatically re-engaging. Racks conveyed automatically through washing
and rinsing systems, powered by an independent 1/15 hp drive motor.
PUMP- Centrifugal type “packless” pump with a brass petcock drain.
Construction includes ceramic seal and a balanced cast impeller on a
precision ground stainless steel shaft, extension or sleeve. All working
parts mounted as an assembly and removable as a unit without disturbing
pump housing. 2 hp motor and 1/2 hp prewash motor: standard horizontal
C-face frame, drip proof, internally cooled with ball-bearing
CONTROLS- Top mounted NEMA 12 control enclosure, with 3.5 inch air gap
between hood and enclosure, housing motor overload protection,
contactors, transformers and all other dishwasher controls. All controls
safe low voltage 24 VAC.
ENERGY SAVER- Rack actuated lever automatically operates the final rinse
solenoid only when a rack passes, saving water and energy. The lever
also activates an adjustable timer control. If no ware passes during the
set time, the machine shuts down.
SPRAY SYSTEM- Spray arms made of type 304 stainless steel pipe. Spray
assemblies removable without the use of tools.
PRE-WASH- One manifold above and one manifold below, each with 3 high
pressure cleaning nozzles
WASH- Upper and lower manifolds with the patented CrossFire® Wash
System. One manifold above with 3 power wash arms, each with 5 high
pressure cleaning slots and one manifold below with 4 power wash arms,
each with 7 high pressure cleaning slots. The slots are precision milled
for water control producing a fan spray. Wash arms are fillet welded to
the S/S manifold. The CrossFire® Wash System provides 4 horizontally
spraying high pressure nozzles.
FINAL RINSE- Three nozzles above and four nozzles below threaded into
S/S schedule 40 pipes. Nozzle assemblies produce a fan spray reducing
water consumption, maximizing heat retention.
DRAIN- Drain valve externally controlled. Overflow assembly with skimmer
cap is removable without the use of tools for drain line inspection.
Heater is protected by low water level control.