Heated glass shelf to have food safe ceramic glass surface. Glass to be ¼“ thick and be UL recognized. 900watt (QSGT-42) or 600watt (QSGT28) silicone heated blanket to be attached to 1/2" aluminum plate with high temperature adhesive. 1/2" aluminum plate to have embedded copper refrigeration lines inside of plate. Refrigeration plate and heating element to be incased in a heavy duty stainless steel framework and foamed with high density polyurethane foam. Unit to include a solid state digital controller for hot operation and lighted on off rocker switch for cold operation. Controller wiring to be half inch liquid tight non-metallic flex 36”. Unit to be fully operational and ready to be installed and supplied with 10’ long cord and plug. Unit to have a properly sized self-contained refrigeration system complete with controls and operate on R-449A (HFO) refrigerant. Unit to be UL listed and shall bear the UL classified EPH label.
Adequate ventilation must be provided to ensure proper operations of this unit. A minimum louvered opening of 14" x 14" with thru airflow is recommended. A minimum of 330 cfm air flow across the condensing unit area is recommended. Failure to provide adequate ventilation will void manufacturer's warranty. Customer side access is required for service of unit.
From The Manufacturer
QuickSwitch™ Drop-in Ceramic Glass Shelf, 45-1/4"W x 25-1/4"D, solid state digital controls, on/off rocker switch (hot-cold/frost modes), 120v/60/1-ph, 7.5 amps, NEMA 5-15P, UL, cUL, UL EPH Classified
The image above may not exactly represent the product
