LTI SIM-TA-60 Cold Food Serving Counter

Standart Features

• 30" wide 14 gauge stainless steel top
• Open Storage Base
• 5" Locking Swivel Casters
• Built in TempestAir cold pan
• Cam Operated Line-up Locks
• 36" A.F.F.
• Shipped fully assembled
• NEMA 5-15 Plug

Specifications

• Top - Top to be 30” wide and fabricated from a minimum of 14 ga. stainless steel with square turndown on all sides and corners fully welded, ground and polished. Top to have #4 satin fi nish and with all edges having a #7 hilite fi nish.
• TempestAir™ Cold Pans - Cold pans to be 18 gauge stainless steel fully welded construction with ¼” coved corners. The cold pan shall be pitched to a 1” drain, which is extended to a valve below the base. All cold pans shall be furnished with urethane insulation on bottom and all four sides of pan. The pan shall be fully separated from the counter top by a full perimeter breaker strip. Cold pans are to allow for a full steam table pan 6” deep. TempestAir™ cold pan shall be 9” deep and include a patented forced air refrigeration system. Cold pan includes low velocity fans and an advanced cold wall design operating on R-449A refrigerant. Cold pan will meet or exceed NSF7 standards while allowing food pans to remain flush to the counter top.
• Body (MF) - Body to be seamless molded fi berglass (F.R.P.) with smooth exterior surfaces and rounded corners. To be constructed by a hand laid process with four layers of 1.5 oz continuous strand fiberglass mat, plus a 24 oz layer of woven roving on the bottom for added strength. Fiberglass to be flame retardant per specifi cation ASTM E-162 having a flame spread of 25% or less. Body interior to be reinforced at each end with 4" wide, 12 gauge galvanized channels welded to form integral U frame for maximum stress relief.
• Body (LP) - Standard grade laminate to cover all sides of an 18 gauge steel uni-body structure. Interior reinforced with 12 gauge galvanized uprights to support shelving and a 20 gauge steel bottom. Corners and bottom edge provided with ½" stainless steel trim strips.
• Body (SS) - Uni-body structure, fabricated from 18 gauge stainless steel, welded ground and polished. Interior reinforced with 12 gauge galvanized uprights to support shelving and a 20 gauge steel bottom.

From The Manufacturer

Simplicity Series Cold Food Counter, Powered by TempestAir, (4) well, 60-3/8"L x30"W x36"D, 14 gauge welded stainless steel top, choice of Fiberglass / Laminate / Stainless Steel, Each well accomodates full size 6" deep pans or fracationaly size pans (pans not included), Counter comes fully asssembled including; Patented Flush Food Pans, Open Storage Base, Cam Operated Line-up Locks, 5" plate mounted casters, open storage, NEMA 5-15P cord & plug, 115v/60Hz/1-ph, 15amp, NSF7, UL, cUL