Shall be a Market Forge model FT-40GLS, gas fired, self contained, fully
insulated, steam jacketed kettle, ASME Code stamped, National Board
Registered, AGA, CGA and NSF certified for operation up to 50 PSI.
A double wall kettle interior shall form a steam jacket around the lower
3/4 of the kettle.
The jacket enclosure shall contain factory sealed distilled water.
The kettle interior shall be stainless steel, type 316 for high acid
content cooking. Kettle exterior is fully insulated.
Cooking temperature shall be controlled with a steam control valve
located on the right side of cabinet top.
The bottom of the kettle shall be of hemispherical design for superior
heat circulation.
The recessed control panel is located on the front right side of the
unit, in full view of the operator and easy to use.
Standard controls include a solid state direct immersion thermostat for
temperature control from 165°F to 275°F (74°C to 135°C), water sight
glass, cooking light, pressure gauge and electronic ignition with
ignition indicator light.
Safety features include low water shut off with indicator light,
pressure switch, pressure relief valve and 100% safety gas shutoff
valve.
The kettle shall pivot on trunnions connected to the power tilt
mechanism and control console.
The tilt mechanism shall allow the kettle to tilt past 90° forward for
complete emptying
The console shall be drip proof, stainless steel clad and shall be
supported on all welded 1-5/8” (41 mm) stainless steel legs fitted with
flange adjustable feet for securing to the floor.