Recently added item(s) ×

You have no items in your shopping cart.

Se Habla Español (877) 254-5449 Store Hours: (M-F) 9am-5pm CST/ (Sat) 10am-2pm Call Center Hours: 8am-10pm CST/ (7days/week)

MasterBilt IHC-48R Ice Cream Hardening Cabinet

Manufacturer Sku:MAS-IHC-48R

MasterBilt IHC-48R Ice Cream Hardening Cabinet
  • Master Bilt - Ice Cream Hardening Cabinet Maintenance

Details

  • Manufacturer Sku: IHC-48R
  • Weight: 560.0000
  • Manufacturer: MasterBilt
  • Width: 52.00
  • Height: 82.00
  • Depth: 36.00
Item:
MAS-IHC-48R
.Ice Cream Hardening & Holding Cabinet Remote, two section, (43) 3 gallon, digital thermometer, (4) heavy duty wire shelves, interior doors, stainless steel front doors, aluminum interior & ends, temperature range -0° to -30°F, 230v/60/1-ph, case heaters/fans/defrost total 9.3 amps, Made in USA

 Spec Sheet
 Video Brochure
 Owner's Manual
 Warranty
ITEM
PROJECT
LOCATION
DATE
IHC-48

Powerful refrigeration system capable of faster pull down, higher product loads & lower temperatures

IHC SERIES

Ice Cream Hardening And Holding Cabinets

MODELS

IHC-27

IHC-48

FEATURES

CONSTRUCTION

• Standard electronic controller

– Allows user to easily monitor defrost functions from the panel interface on the front of the merchandiser

– Audible and visual alarm

– Decreases service time and calls

– Eliminates room thermostat, defrost termination/fan delay control, defrost timer and digital thermometer or other temperature indicator

• Stainless steel exterior

• Anodized aluminum interior

• Heavy-duty 6"-7" adjustable legs

• 4 heavy-duty welded wire gray epoxy- coated cantilever shelves per section

• 2 1 /2" foamed-in-place “zero ODP” urethane insulation

• Door swing:

IHC-27

IHC-48

left

left door hinged left,

right door hinged right

hinged

• Sure-sealing magnetic gaskets (replaceable)

• Heavy-duty horizontal door handle

• Anti-condensate door frame heater provided through discharge liquid line

• 2" stainless steel foamed-in-place doors

• Lift-off inner and outer doors

REFRIGERATION

• Refrigerant: R-404A

• Self-contained, top mounted, semi-hermetic refrigeration system

• Minimum 4" clearance required between cabinet back and wall

• Temperature range:

0° to -30°F (-18° to -34°C)

• R-factor (insulation efficiency rating):

DOORS

• Two staggered height, energy saving insulated inner doors with magnetic catches per section

• Self-closing doors with 90° hold-open feature

21.55 on walls, 17.24 on doors

Drain plumbing hookup recom- mended. Condensate pan available if there is no access to drain plumb- ing. Condensate pan must be field installed and requires a dedicated 15 amp, 120 volt circuit.

WARRANTY

• Standard limited two year parts and labor

• Additional three year coverage on compressor part

OPTIONS

Add suffix “R” for remote system on IHC-48 only

Casters

Extra welded wire gray epoxy- coated cantilever shelves

Pan rack

Voltage boosting transformer

Condensate evaporator drain pan NOTE: Must be field installed and requires a dedicated 15A, 120v circuit.

908 Highway 15 North • New Albany, MS 38652 PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com

IHC SERIES

ICE CREAM HARDENING AND HOLDING CABINETS

TECHNICAL SPECIFICATIONS
DIMENSIONS
DIMENSIONS
CAP.
SHIP
SHIP
(in.)
(mm)
UNIT
NO. OF
NO. OF
3 GAL.
CU.
WT.
MODEL
L
D
H*
L
D
H*
VOLTS** AMPS
H.P.
SECTIONS
SHELVES
CANS
FT.
LB/KG
IHC-27
31
36
82
787
914
2083
208-230
5.5
3/4
1
4
STANDARD
SHELF SIZE
(in inches)
23 3 /8 x 24 5 /8
22 x 23 1 /2
20
76.0
590/268
IHC-48
52
36
82
1321
914
2083
208-230
6.5
1
2
8
43
119.0
840/382

*Height includes 6-7" adjustable legs. **IHC models operate on a minimum of 208 volts. A voltage boosting transformer (part no. 39-01087) must be used when the supply voltage is less than 208 volts.

PLAN VIEW

LISTINGS

SIDE VIEW

ELEVATION VIEW

HOOKUP

Via plug in, 8 foot long, flexible 3 wire 14/3 cord with molded plug. 15 amp/220 volt service is recommended.

NEMA 6-15P

BID SPECIFICATIONS

Item no. IHC- Provide

Hardening and Holding Cabinet(s), Master-Bilt ® model no. IHC- Cabinet will be equipped with an electronically controlled monitoring system. It will also be provided with 6"-7" adjustable legs, four welded wire,

(

) Ice Cream

gray epoxy-coated cantilever shelves, 2 1 /2" foamed-in-place “zero ODP” urethane insulated walls. Cabinet to have stainless steel exterior and anodized aluminum interior. Cabinet also to have 2" stainless steel, self-closing, foamed-in-place doors. Interior doors to be provided with cabinet.

The refrigeration system is to be top mounted, self-contained and use R-404A refrigerant. The temperature range will be 0° to -30°F (-18° to -34°C). Cabinet to have standard limited two year parts and labor with additional three year coverage on compressor part. Cabinet to be UL, C-UL and NSF listed.

NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity. All specifications subject to change without notice.

908 Highway 15 North • New Albany, MS 38652 PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com

1146-6/17-1m

©2017 Master-Bilt Products, an unincorporated division of Standex International Corporation. All rights reserved. Printed in U.S.A.

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality

Get Instant Coupons

Save $75 today!

Please Use Coupon Code: 75OFF