CONSTRUCTION: All heli-arc welded with all
seams welded and sealed (no rivets).
BASE: Rectangular base of 2” x 2”
X 3/16” thick extruded aluminum angle welded
into rigid framework. At each corner a caster
plate 2 3/4” x 4” x 3/8” thick, pre-tapped for 1/4”
bolts is securely welded to the base. A “V”
shaped rod (3/8” thick) is welded to the front
underside of the base to accept a drag hook.
.080” sheet forms a removable base to hold
oval trays.
SIDES & HANDLE: Unit has three
sides consisting of 1” x 1” x .070 wall
extruded aluminum tubing welded securely to
the base. The tubing sides use gussets of 1/4” x
1 1/2” strap (welded from tube to base)
for extra strength and rigidity. Tubing on rear
of unit extends 5” above the sides and is
formed into a handle, from the center of the
handle to the base. A pan stop of
1/4” x 1” strap is welded into place. Note: All
tubing has rounded corners and all seams
are fully welded.
CASTERS: Four platform type 5” casters,
full swivel design with ball bearing axle and
non-marking wheels. Load Capacity = 290#
each.
The image above may not exactly represent the product
