The innovative “Cool Breeze” technology allows you to maintain product at
41 degrees Fahrenheit or less yet requires no ice. The unit cascades a
“Cool Breeze” of air over the product without drying it out or causing
freezer burn.
NSF/ANSI STANDARD 7
This unit is listed with CSA in NSF/ANSI Standard 7 for design and
construction and has been performance tested for the storage of
potentially hazardous foods. The performance test criteria is holding a
food-like media at or below 41°F without any freezing for four hours at
86°F ambient temperature.
Piper Products 3-CB Refrigeration System
1/3 horsepower compressor
Fan-cooled condensing unit with a capillary tube expansion device
Thermostat for better temperature control
Environmentally safe 134A refrigerant
Piper Products 3-CB Electrical
120 volts single-phase
Eight foot electrical cord with NEMA-5-15P plug
On/Off switch and pilot light mounted on control panel of units operator
side
Piper Products 3-CB Standart Features
14-gauge stainless steel top with 1-1/2” turndown on all sides
Top secured by four recessed bolts for easy access
14-gauge stainless steel legs fastened to 18-gauge stainless steel
bottom shelf
20-gauge stainless steel end and front panels are attached to legs
4-3/4” deep well with interior stainless steel parts easily removed for
cleaning
Well is enclosed with insulation on sides, end and bottom
1” drain with shutoff valve is located on operator’s left side. Valve is
3/4" FPT. Drain valve is 3/4" FPT.
Sliding doors
Louvered panels for ventilation of condensing unit
End louver panel removable to access compressor
5” diameter swivel plate casters, 2 with brakes
Interlocking mechanism is provided to interlock with other Elite units
The image above may not exactly represent the product
