Piper Products 4-CMDI Single and Multiple Cold Drop-Ins
NSF/ANSI STANDARD 7
Mechanically Refrigerated/Ice Cooled (CM) and Ice Only (CI) units are
designed to be used with ice. Mechanical refrigeration is added to retard
the melting of the ice. These units have NOT been performance tested for
the storage of potentially hazardous foods. BCM units are listed with CSA
in NSF/ANSI Standard 7 for design and construction and has been
performance tested for the storage of potentially hazardous foods. The
performance test criteria is holding a food-like media at or below 41°F
without any freezing for four hours at 86°F ambient room temperature.
Piper Products 4-CMDI Refrigeration System
CM units - Refrigeration coils are copper tubing mounted to the bottom
of the well
1/3 horsepower fan cooled condensing unit with a capillary tube and
thermostat for control
Environmentally safe 134A refrigerant
Piper Products 4-CMDI Standart Features
14-gauge stainless steel top with a feathered down edge on all sides for
dropping into countertop
Well is fabricated of 20-gauge stainless steel and is 5” deep, Extra
deep models (BCM) have a well depth of 9-7/16”
Well is insulated with 1” fiberglass around sides and 2” thick
fiberglass on bottom
A 1” I.D. drain is built into the bottom of the well with shut-off valve
Well is completely enclosed in a galvanized sheet housing, attached to
framework
Unit is 120 volt single phase
A junction box is provided for field wiring. These units are designed to
be mounted in all metal fixtures