Frame:The frame is constructed of 1" O.D. 16 ga.
stainless steel tubing formed to support an overhead silverware
dispenser and to serve as push handles at both ends.
Silverware Dispenser:The dispenser is constructed of
all welded 18 ga. stainless steel and is securely welded to the top of
the tubular frame. The tops are canted and are cut out to accommodate
6-3/8" x 10-3/8" x 4" deep stainless steel silverware pans.On eight and
ten pan capacity models, the silverware dispenser is two tiers high. The
silverware pans are furnished as standard.
Shelves:Each shelf is press formed from a single sheet
of 18 ga. stainless steel. It is flanged down 1-5/16" on all four sides
and formed back at a 30º angle for rigidity. Each inside corner is
fitted with an ABS black plastic bracket and sleeve to accommodate an
upright. The bottom shelf on all models is set 8" above the floor. With
10" clearance between shelves on 2 shelf models.
Casters: The units are mounted on four 4" diameter
heavy duty, casters.
The unit has one bottom shelf and is supplied with five silverware pans
on one level.