Piper Products RDM161S 31" Reach-in Blast Chiller/Shock Freezer, Self-Contained, (16) 1/1 GN, 53 lbs Freeze / 79 lbs Chill Capacity, S Control

Why use Piper Products Shock Freezers/Blast Chillers ?

Only Piper's equipment has the advantage of technology and certification. This ensures that your food is kept "out of the DANGERZONE." Food spoilage occurs mainly because of rapidly accelerated bacteriological activity within the 40F-140F "DANGER-ZONE." Since there is no simple way of knowing when the degree of contamination has risen to a level which could result in illness or death, chilling or freezing food rapidly is the only answer. FDA & HACCP regulations permit a maximum of 6 hours to chill food from 140 to 40 degrees, while some states now permit only 4 hours. This is 6 to 8 times faster than what traditional refrigeration equipment can accomplish. Blast chilling and shock freezing are the key factors in HACCP compliance and the fight against foodborne pathogens.

Piper Products RDM161S Standart Features

• External sides and top in AISI 304 18/10 stainless steel thickness 0.02” (0,6 mm) (Scotch-Brite satin finish)
• AISI 304 18/10 stainless steel door th. 0.03” (0,8 mm) (Scotch-Brite satin finish)
• Internal covering completely radiated in AISI 304 18/10 stainless steel
• Internal base moulded for containment with central drain connection for discharge of water used for washing
• High-density expanded polyurethane insulation (about - 2.7 Lbs/ft3- 42 kg/m3), thickness 2.36” (60 mm), without HCFC
• Copper - aluminum evaporator, protected with non - toxic epoxy resins through cataphoresis painting systems
• Deflector can be opened on side hinges, in order to clean the evaporator
• Copper condensing coil with high heat yield aluminium fins
• Anti-condensate resistance positioned on the box under the magnetic gasket
• Ergonomic handle for the complete length and magnetic gaskets on the 4 sides of the door
• Self-closing doors with block when opened to 100°
• Stainless steel feet Ø 2” height-adjustable H 5.9”÷7.0” (150÷180mm) with anti-scratch cap
• Probe heated for easy extraction
• Shelf or tray racks in 18/10 stainless steel encased on the sides of the room, easily removable for washing

Piper Products RDM161S Refrigerant Unit

• Fans with indirect flow onto the product
• Hermetic compressor
• R404A refrigerant liquid
• Evaporators with large exchange surfaces, for high cooling efficiency
• Manual defrosting device and condensate evaporation system without use of electrical energy
• High capacity liquid/gas heat exchanger

Piper Products RDM161S Commands, Controls And Safety Devices

• Control and command circuit board equipped with high-visibility custom display, which highlights the status of the appliance at all times
• The T version can memorise up to 99 programs, can store any HACCP alarms in the memory and control up to 4 needle or 4 sensors (optional)
• Circuit breaker for compressor protection
• Internal fan stop micro switch when door is opened