Moffat Turbofan H10D-FS HOLDING CABINET - FULL SIZE
H10D-FS
Unit shall be a Moffat electrically heated Turbofan Holding Cabinet.
E.T.L listed and NSF.4 listed. The holding cabinet shall have double
skin construction with stainless steel interior and exterior sides, front
and top. Door shall be side hinged. Unit shall have capacity for 10 full
size 18” x 26” sheet pans. A single speed fan shall gently and evenly
circulate air around the cabinet. Cabinet shall be controlled by a Digital
display electronic Temperature and Timer controller. 3 hold timers shall
be standard. Holding cabinet shall be mounted on castors, with two rigid
castors at rear and two castors, swivel and wheel lock at front. Holding
Cabinet shall operate independently or in conjunction with Moffat Turbofan
E32D Convection Oven. Holding Cabinet shall be fitted with a NEMA 6-15P
cordset. Unit shall be supplied in 100% recyclable shipping packaging.
STANDARD FEATURES
Designed for individual use or system installed with
Turbofan E32D Convection Ovens
10 full size 18” x 26” sheet pan capacity
2 7/8”/ 74mm tray spacing
208-240V plug-in 15A NEMA 6-15P cordset fitted
1900W (240V), 1430W (208V) cabinet heating
Full double skin construction
Digital display Temperature and Timer controls
Large easy view 3/4”/ 20mm high displays
Electronic temperature control
3 hold timers
Continuous door seal
Low velocity circulation fan system
Dual halogen cabinet interior lamps
Cabinet drain to condensate pan
4 dia. 3”/76mm castors with 2 front castors with wheel
and swivel lock, 2 rigid rear castors