Top heated serving wells and lower heated compartments for pans
SecoSelect CW2 Standard Features
Stainless steel construction
Fully insulated
Heavy duty double wall reinforced construction
Casters through bolted to base hat-channel
Door hardware mounted through framing
Door framed, insulated and gasketed
Door louvered with adjustable damper
Top mounted control panel
Armor Heat™ system
5” caster standard
Low power requirements
Wells are wrapped with 2” of high density fiberglass insulation and
operate wet or dry
Top wells temperature range to 230 degrees
Lower compartments accommodate 12” x 20” hotel pans
Lower compartments temperature range to 230 degrees
SecoSelect CW2 Specifications
GENERAL: Cabinet constructed with 16 gauge stainless steel and
reinforced with 12 gauge galvanized steel and hat-channels. All double
wall construction insulated with high density fiberglass insulation. All
exterior surfaces shall be ground and polished to a #3 finish.
BASE FRAME: Base shall be made with 16 gauge galvanized steel with 12
gauge galvanized steel reinforced hat channels. Casters are bolted to
hat-channels.
TOP: Top shall be 16 gauge 300 series stainless steel. Wells are 6 1/2”
deep all stainless steel individually wrapped with 2” of high density
fiberglass insulation.
INNER CABINETS: Inner cabinets shall be all 24 gauge 300 series
stainless steel. Inner cabinet shall have permanently mounted pan rails.
Rails shall accommodate 5 (12” x 20” x 2 1/2”) deep pans, or multiples
of 4” and 6” deep pans. Cabinets will also accommodate 1/2” and 1/3”
size pans. Inner cabinets fully insulated with high density fiberglass
on all sides. Inner cabinets heated by the Armor Heating™ system.
DOORS: Doors shall be all 20 gauge stainless steel. Door shall have full
interior frame constructed of 3/4” x 3/4” 14 gauge galvanized angle
steel. Doors shall be fully insulated and gasketed. Doors shall have an
exterior louver with an interior dampers for moisture control. All door
hardware shall be secured through framing in cabinet and door. Doors
shall have a heavy duty positive and magnetic door latch and 2
refrigeration type door hinges.
ELECTRICAL CHARACTERISTICS: CW Carts shall have a top mounted control
panels consisting of an on and off switch with power indicating light,
solid state electronic control and digital temperature display. Provided
with 8’ long cord
CASTER: CW Carts shall have 4 heavy duty 5” casters, 2 rigid and 2
swivel casters mounted to hat-channel.