Heavy Duty transport cabinets with universal
tray slides for use with 12”x 20”
pans and 18”x 26” trays.
SecoSelect M11UA12 Standard Features
Stainless steel interior and exterior
Fully insulated
Cabinet is fully framed all vertical and horizontal edges
Caster mounting plates fully welded to cabinet framing
Caster mounting plates 6” x 6” steel plate drilled and tapped
All hardware mounted through framing
Door framed, insulated and gasketed
Door louvered with adjustable damper
Top mounted control
60 to 230 degree temperature range
Armor Heat® heating technology makes this the most energy efficient cabinet in its class
5” casters standard
Low power requirements
Universal angles accommodate 250 lbs per pair
Universal angles adjustable on 1 1/2” centers
Universal angles will accommodate 2 (12” x 20”) pans. 1 (18” x 26”) or 2 (14” X 18”) trays
Universal angles designed to minimize pan/tray movement during transport
Universal angle posts removable for cleaning
SecoSelect M11UA12 Specifications
GENERAL: Cabinet constructed with stainless steel interior and
exterior. All double wall construction, insulated with 2” high
density fiberglass insulation on the top, sides, door and bottom.
All exterior surfaces shall be ground and polished to a #4 finish.
INTERNAL FRAME: All vertical and horizontal edges framed
with 1 1/2” x 1 1/2” x 1/8” angle steel, arc
welded, cross braced and reinforced at all corners.
BASE FRAME: 1/8” formed steel base. Base shall have, four 6”
x 6”x 5/16”, steel plates drilled and tapped to accommodate 5”
or 8” casters. The plates are fully welded to frame on all four
sides.
INNER CABINET: Inner cabinets shall be all 24 gauge 300
series stainless steel. Universal angles constructed of heavy
gauge wire, vertical and horizontal 11 gauge flat stock. Each
pair shall accommodate 250 lbs. Universal angles are chrome
plated with heavy nickel and a clear coat. Angles adjustable on
1 1/2” centers. Angles will accommodate 2 (12” x 20”) pans or 1
(18” x 20”) tray or 2 (14” x 18”) trays.
DOOR: Doors shall be all 20 gauge stainless steel. Door shall
have full interior frame constructed of 3/4” x 3/4” 14 gauge
galvanized angle steel. Doors shall be fully insulated and
gasketed. Doors shall have an exterior louver with an interior
damper for moisture control. All door hardware shall be secured
through framing in cabinet and door. Doors shall have a
heavy duty positive and magnetic door latch and heavy duty
refrigeration type door hinges.
ELECTRICAL CHARACTERISTICS: Cabinets shall have a top
mounted control panel consisting of an on/off switch with power
indicator light and electronic control with digital temperature
display. Each cabinet shall be heated by a 120 volt 60 cycle
1 phase Armor Heat™ system. Cabinets shall come complete
with a permanently mounted 8’ cord with a Nema #5-15P plug.
Top of cabinet is removable for easy access to controls.
CASTERS: Cabinet shall have 4 heavy duty 5” casters, 2 rigid
and 2 swivel casters mounted to 6” x 6” x 5/16” steel plate
drilled and tapped.