Why use SecoSelect ORV-3-1818-X Versatile Tray Rack ?
For 12” X 20” Pans and 18” X 26” and 14” X 18” Trays
SecoSelect ORV-3-1818-X Standard Features
All Welded Aluminum Construction with 1” Square 6063-T5 aluminum alloy
tubing with a wall thickness of .065”.
Welded reinforcement rods between side frames for added strength and
rigidity.
One Piece Side Frames for added strength and durability.
Rolled corners on side frames for easy installation of rack covers.
Extruded 1/8” thick 6063 T-5 Aluminum Alloy Versatile Tray Slides with
raised bearing surface for ease in loading and unloading pans.
2 1/8”, 3 1/8” or 5” Slide spacing available.
All Welded 6063-T5 Solid Aluminum .100” thick bottom with .100” thick
aluminum welded hat channels for casters and a perimeter non-marking
bumper.
5” plate type casters, two rigid and two swivel with brakes.
Lifetime warranty, excluding casters.
SecoSelect ORV-3-1818-X Specifications
GENERAL: Rack shall be all aluminum construction and shall be fully
welded.
BASE: Base shall be .100 Aluminum and shall be reinforced with .100
aluminum hat-channels. Casters through bolt base and hat-channels.
POST: Posts shall be constructed using 1” square tubing of 6063 – T1
alloy. This alloy shall have a wall thickness of .065”. Two 3/4”
reinforcement rods are welded between the posts for rigidity. Each post
is arched for maximum strength.
SLIDES: Slides shall be constructed using .100” thick aluminum with a
raised bead. Slides are welded to rack posts.
CASTERS: Rack shall come complete with 4-5” nonmarking plate casters, 2
rigid and 2 swivel. Casters shall have a weight capacity of 200 lbs
each.