The Southbend HDG-18-316L 18" Thermostatic Griddle
Why Use Southbend Griddle?
The Southbend Heavy-Duty Counterline products are designed for medium to
heavy-duty applications. Southbend's counterline offers unsurpassed performance,
combining proven control systems with Southbend quality and durability.
Southbend HDG-18-316L Features
HDG-18-316L: 18" Thermostatic Griddle - Heavy Duty
Counterline - Gas - 30,000 BTU
Available in 18” and 24” widths
30,000 BTU (NAT or LP) burner per 12” Thermostatic Models
Electronic spark ignition (battery)
316L stainless steel front, rear, sides, and bottom panels
Reinforced, insulated double wall sides
1” thick polished rolled steel plate
5” high 316L stainless steel rear and side splash guards
3/4” rear gas connection and pressure regulator
Protected flue opening
Exclusive “NO COLD” Zone - Uniform heat distribution across surface
Each burner equipped with runner tube
Grease drawers with large capacity
Fully welded griddle plate with protected exhaust vent
“Insta-on” thermostatic controls for precise settings between 200°F and
400°F
Imbedded load sensing thermostat
Flame failure safety device
Southbend HDG-18-316L Specification
Exterior Finish: Front, sides and vent are constructed
of #3 polished 430 and 304 stainless steel. Bottom and rear are
aluminized steel. Sides are reinforced and fully insulated. 5” rear and
4” side splash.
Griddle Plate: 18” and 24” wide unit with one 30,000 BTU Fully
welded, 1” thick polished steel griddle plate with side splash
guards, and grease drawer.
Griddle Controls: Independent, “Insta-on” thermostatic
controls with uniform temperature range of 200°F to 400°F.
Legs: Stainless steel 4” adjustable legs.
Gas Heat Control System: Each griddle is heated by a “U”
shaped burner. Each burner is controlled by a thermostatic
control. For safety, each pilot has a flame failure device. A 3/4”
rear gas connection is standard.