Heavy duty stainless steel exterior, with galvanized steel finished top, bottom and back wall of exterior. High quality 304 stainless steel interior, ABS evaporator drain cover. Insulated with 2.5” thick high density foamed-in-place polyurethane foam. Four 4” diameter casters (front casters with brakes). Door heater installed around inside cabinet frame to prevent moisture build up.
Refrigeration System
Self-contained condensing unit located at top of cabinet for high performance
Oversized condenser and evaporator coil cools to set
temperature in a minimum time period and maintains it
Environmentally friendly CFC free R-134A and R-404A refrigerant
Adjustable defrost cycle between every 3 to 12 hours with
400 watt heater, time initiated, and both temperature and time
terminated for fail-safe backup
Automatic evaporator fan motor delay on defrost cycle
Copper tube and aluminum fin evaporator with
anti-corrosive coating
Energy efficient condensate drain pan located at bottom of
cabinet constructed of anodized aluminum
Two pressure relief ports located at exterior back wall and top of cabinet for rapid re-entry
Interior airflow backguard to ensure proper air circulation
Pre-wired and ready to plug to, 115V/60Hz/1Ph, NEMA 5-15P
Doors
Grey PVC door frames
Double pane glass system with a layer of transparent thermal insulation film in between two layers
Heavy duty adjustable torsion spring self-closing door system
One piece snap-in magnetic door gasket for easy replacement
Heavy duty die cast door handles
Lighting and Shelving
Safety shielded vertical fluorescent interior lighting with on/off switch
Three epoxy coated wire shelves per section
304 stainless steel pilasters and shelf clips
Tarrison CO-TSGR1 Specifications
Temp :REF
No. of Doors :1 (swing)
Capacity (Cu.Ft.) : 23
# of Shelves : 3
HP : 1/3
Exterior Dimensions L x D x H* : 29.25” x 31.75” x 79.25”