Side, front and rear access panels provide for ease of service and
maintenance
14-guage stainless steel drawer slides
NEMA 5-15 plug with 9’ cord and cord retainer
One year limited parts and labor warranty
Wolf ARS60 Specifications
Construction, Hardware and Insulation- Cabinet exterior
front, sides, louver assembly and drawers are constructed of 20-gauge
430 stainless steel, exterior back and bottom are constructed of heavy
gauge galvanized steel. Cabinet interior sides are constructed of
22-gauge 400 series stainless steel, top and bottom are constructed of
22-gauge 300 series stainless steel. A set of 4" high casters are
included standard. Vinyl magnetic snap-in drawer gasket assures tight
drawer seal. Both the cabinet and drawers are insulated with an average
of 2" thick high density, non-CFC, foamed in place polyurethane.
Controller The easy to use water resistant
INTELA-TRAUL® microprocessor control system is supplied standard. Unit
is NAFEM Data Protocol communication (NDP) ready. Optional hardware
required to be NDP compliant (3rd party software required for network
connection). It includes a 3-Digit LED Display, °F or °C Temperature
Scale Display Capability, and an RS485 data port. In addition it
includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Clean
Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power
Supply Interruption.
Refrigeration System The left side mounted,
self-contained, balanced refrigeration system using R-404A refrigerant
features an off-cycle defrost, capillary tube, air-cooled hermetic
compressor, automatic condensate evaporator, and a dedicated
rear-mounted evaporator design which distributes cold air through each
drawer section. A 9' cord and retainer is provided. Standard operating
temperature is 34 to 38°F.
Drawers Each heavy-duty drawer is designed to
accommodate 12" x 20" x 6" deep pans. They are constructed using
14-gauge stainless steel drawer slides and 2" diameter stainless steel
rollers. Drawers include both a self-closing and stay-open feature.